How do you turn off the VSC light on a Lexus ES 350?

How to Turn Off the VSC Light on a Lexus ES 350
The VSC (Vehicle Stability Control) light on a Lexus ES 350 can be turned off by following these steps:
1. Press and hold the TRAC/VSC switch: Locate the TRAC/VSC switch, which is typically located near the gear shift. Press and hold the switch for more than three seconds while the car is stopped.
2. Observe the indicator lights: After holding the switch, the VSC OFF indicator light should come on, and a “Traction Control Turned Off” message may be displayed on the multi-information display.
3. Verify the VSC light is off: Check the dashboard to ensure that the VSC light is no longer illuminated. If the VSC light remains on, there may be an issue with the system that requires further inspection or maintenance.
It’s important to note that turning off the VSC system should only be done in certain situations, such as when you are stuck in mud, snow, or dirt. The VSC system helps prevent the drive wheels from spinning on slick surfaces, so it’s generally recommended to keep it enabled for normal driving conditions.
If you are unsure about turning off the VSC light or if the light remains on after following the steps above, it is recommended to contact a Lexus dealership or a qualified mechanic for further assistance.
I hope this helps! Let me know if you have any other questions.

What causes VSC light to stay on?

When you see the VSC light on your Toyota or Lexa, it indicates that the vehicle’s electronic body stability system is experiencing problems. This can be caused by faulty sensors, problems with the braking system, lack of tire grip, or other failures related to stability control.

How do I reset my VSC light?

Turn on the ignition. But don’t start the car. Now put one end of the wire into e1. And then touch the other end on the TS terminal. Four times within eight seconds.

Can I still drive with the VSC light on?

During this time, it’s advisable to drive with caution and adjust your driving behavior to ensure safety until the VSC system is functioning properly again.

Where is the VSC button on Lexus ES 350?

Where is the VSC button located? You’ll typically find it near the steering wheel or the gear selector on a Lexus ES 350, but some Lexus ES models might not have it at all. You’ll want to check your owner’s manual.

Why won’t my VSC light turn off?

If the VSC light in your Toyota or Lexus flashes briefly, it is likely that your VSC system is functioning correctly. If the light stays on or other warning lights on your dashboard appear, it’s a sign that your car needs professional attention. The ABS and other control modules are compatible with the VSC system.

Can VSC be turned off?

Push and hold the button for three seconds to turn off both TRAC and VSC. The TRAC OFF and VSC OFF indicators will appear. Push the switch again to turn the systems back on. You can also turn the engine off and TRAC and VSC will come back on when you restart the engine.

How do you fix a VSC light on a Lexus?

And fixed. So if you don’t have a scan tool to reset those lights all you need to do is locate the battery on your vehicle. And you can see this right here is a positive terminal.

Where is the VSC off button in a Lexus?

So pretty simple again. This is the button here and that’s what the picture here looks like. Okay. Good luck.

What causes check engine and VSC lights to come on?

However, if the VSC Off light appears, it means the VSC system has malfunctioned and been turned off by your vehicle’s onboard computer. The check engine light may be triggered by this disabling of the VSC system or may be caused by a semi-related issue.

Is it safe to drive with the VSC light on Lexus?

This alert typically indicates an issue with the VSC system or its components. While you are not in immediate danger if the VSC light comes on, it’s essential to address this warning promptly to ensure your Lexus continues to operate safely. Ignoring the warning could lead to decreased stability and traction control.