How to Turn Off the Tire Pressure Light on a Chevy Equinox
If the tire pressure light is on in your Chevy Equinox, there are a few steps you can take to turn it off. Here’s what you can try:
1. Check the tire pressure: Start by checking the tire pressure in all four tires. Use a tire pressure gauge to ensure that each tire is inflated to the recommended air pressure level as indicated on the Tire and Loading Information label. This label is usually located on the driver’s side door jamb or inside the glove compartment.
2. Inflate the tires: If any of the tires have low pressure, inflate them to the correct air pressure level. Use a tire inflator or visit a gas station with an air pump to add air to the tires.
3. Drive the vehicle: After inflating the tires to the correct air pressure, drive your Chevy Equinox for at least 10 miles (16 km). This will allow the tire pressure monitoring system (TPMS) to detect the new tire pressure readings and reset the tire pressure light.
If the tire pressure light does not turn off after following these steps, there may be an issue with the TPMS system. In that case, it is recommended to visit a certified Chevy dealership or a qualified mechanic to diagnose and resolve the issue.
Please note that the specific steps to turn off the tire pressure light may vary depending on the model year of your Chevy Equinox. It is always a good idea to consult the owner’s manual for your vehicle for the most accurate and up-to-date instructions.
I hope this helps! Let me know if you have any other questions.
Source:
–
Contents
- Where is the reset button on the Chevy tire pressure sensor?
- Why is my tire pressure light still on after filling tires?
- Can I reset my TPMS myself?
- Why is my tire pressure light on but my tires are fine?
- How do you reset the tire pressure light on a Chevy Equinox?
- Why won t my tire pressure light go off even though pressure is fine?
- How do I get tire pressure off my dashboard?
- How do you turn off the tire pressure sensor on a Chevy?
- Where is the TPMS button on a equinox?
- Where is the TPMS button located?
The TPMS reset button is usually located underneath the steering wheel, but check your owner’s manual for its exact location.
Why is my tire pressure light still on after filling tires?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
Can I reset my TPMS myself?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
Why is my tire pressure light on but my tires are fine?
TPMS malfunction: If the TPMS itself is malfunctioning, the light may come on even if your tire pressure is normal. If you see the tire pressure light and your tires seem properly inflated, it’s a good idea to have the TPMS checked by a mechanic.
How do you reset the tire pressure light on a Chevy Equinox?
After you inflate your tires, drive at 50 mph or above (in an appropriate speed zone) for 10 minutes to reset your sensor. The TPMS light should go away. Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times.
Why won t my tire pressure light go off even though pressure is fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
How do I get tire pressure off my dashboard?
Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car. With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it.
How do you turn off the tire pressure sensor on a Chevy?
Once. All right so after your uh horn beeps uh the marker light on the front will turn off uh then the marker light for the next Position will go off it’s generally.
And then what you’ll do is you’ll hold the checkmark button for a few seconds. And you’ll hear the one that lets you know that you’re in entire learning active.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.