How do you turn off the maintenance light on a 2004 Toyota Solara?

How to Turn Off the Maintenance Light on a 2004 Toyota Solara
To turn off the maintenance light on a 2004 Toyota Solara, you can follow these steps:
1. Turn the Car to the On Position: Turn the car to the on position, but don’t start the car.
– Use the trip button on the left-hand side of the instrument cluster to select your odometer.
– Turn the car off.
2. Press the Trip Button and Turn the Key to the On Position: Press the trip button in and turn the key to the on position. The odometer should flash, and the maintenance required light will turn off.
– Press the odometer/trip button located on the instrument cluster until you see ODO on the LCD display.
– Turn the ignition off.
– Next, press and hold the trip button and turn the ignition back on.
– The maintenance light should then turn off. Turn the car off and on again to be sure that the message has cleared [[3]].
If these steps do not successfully reset the maintenance required light, you can also try disconnecting your Toyota Solara’s battery, causing the internal computer to reset. It’s important to note that the maintenance required light is a reminder that it has been 5,000 miles since your last oil change. If you change your own oil, or go to a quick lube shop, you will have to switch off your Toyota Solara’s oil indicator light yourself.
Remember to consult your vehicle’s manual or contact your dealer for further instruction if needed.

What does the maintenance light mean on a Toyota Solara?

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

How to get rid of maintenance required light on Toyota Highlander 2004?

Resetting Maintenance Light on Toyota Highlander
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer button for about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

How do you reset the maintenance light on a Toyota Solara?

Then it resets to zero. And then I let go okay. So all I do is hold this in and I turn the key to the on position until those little bars disappeared. And it went to zero once it goes to zero.

How do you reset the maintenance light on a 2004 Toyota Solara?

Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.

How do you turn off maintenance on a Toyota?

Insert your car key into the ignition, and turn it to “On” but don’t start the car. Click and hold the trip reset button located near the odometer until you see “Trip A” appear on the center screen. Continue to hold the trip reset button and turn the key back to the “Off” position.

How do you turn off the maintenance required light on a Toyota Solara?

Then it resets to zero. And then I let go okay. So all I do is hold this in and I turn the key to the on position until those little bars disappeared. And it went to zero once it goes to zero.

How do I clear the maintenance required light?

Quick and Easy Steps to Reset the Maintenance Required Light

1. 1 Turn your car on, but do not start the engine.
2. 2 Change the dashboard display to “TRIP A.”
3. 3 Switch your car off and hold the “ODO/TRIP” button down.
4. 4 Start your car, but don’t turn on the engine.
5. 5 Hold the “ODO/TRIP” button down for 10 seconds.

How do I turn off maintenance required light on Toyota?

And you need to reset the maintenance light very easy to do I’m going to show you on a couple of different vehicles uh. But they’re all basically the same since 2019. Almost everything has been really

How to get rid of maintenance required light on Toyota Camry 2004?

So we’re gonna turn it off and now we’re gonna turn it back on. And there you have it guys if you guys could see there’s no more maintenance required. Light. So that’s how you easily.

How do you turn off the maintenance required light on a Toyota?

Okay. Good when the odometer shows the total mileage the next thing you do is press and hold that trip odometer button as you hold the trip odometer button. Put the key to the off position.