To turn off the automatic parking brake on a Ford, you can follow the deactivation procedure provided by Ford. Here are the steps to deactivate the electronic parking brake:
1. Deactivation Procedure:
– Set the ignition to ON.
– Press down on the accelerator pedal and HOLD it there while you move the EPB switch up to the APPLY position.
– Continue to hold the pedal and EPB switch in those positions, while you turn the IGN to OFF and then back to ON within 5 seconds.
– The electronic parking brake system will apply and then release the parking brake to calibrate the proper air gap between the rear brake pads and the brake rotor.
– Turn the IGN to OFF and release the pedal and EPB switch.
2. Maintenance Mode:
– To replace the rear brake pads, the EPB must be set in the Maintenance Mode before retracting the caliper pistons. This is done by following the deactivation procedure mentioned above.
These steps should help you turn off the automatic parking brake on your Ford.
Contents
- Where is parking brake switch?
- Why won’t my electric parking brake release?
- What is Ford’s auto hold?
- Why does my parking brake come on automatically?
- How do I turn on auto hold on my Ford?
- How do you turn off the electric parking brake on a Ford?
- Can you turn off automatic parking brake Ford Explorer?
- How do you turn off the automatic parking brake?
- How do I turn off Ford auto hold?
- Do electronic parking brakes automatically disengage?
Where is parking brake switch?
Locate your parking brake switch. If you have a foot style parking brake, the switch is under the dash mounted to or behind the lever. For a hand style parking brake only, remove the center console to gain access to the parking brake lever and switch. Unplug the electrical connector to the parking brake switch.
Why won’t my electric parking brake release?
Things You Should Know
Clean the parking brake button so there’s no debris interfering with the switch. This is the most common cause of electronic parking brake problems. Alternatively, check the fuse for the electric parking brake in the fuse box to see if it needs to be replaced.
What is Ford’s auto hold?
Auto Hold keeps the vehicle at a complete stop until you press the accelerator. This is useful in stop-and-go traffic and at traffic lights, so you can relax your foot more comfortably. The rear brake lights remain illuminated when Auto Hold is engaged.
Why does my parking brake come on automatically?
If the automatic transmission is not in PARK, the seat belt is unbuckled, the driver door is open, the vehicle is at a standstill, and there is no attempt to depress the brake pedal or accelerator pedal, the park brake will automatically engage to prevent the vehicle from rolling.
How do I turn on auto hold on my Ford?
Once you come to a complete. Stop. Turn this bad boy on. And you will stay there until you put your foot on the gas.
How do you turn off the electric parking brake on a Ford?
Switch the ignition on. Press and hold the brake pedal. Push the switch down. The red warning lamp turns off.
Can you turn off automatic parking brake Ford Explorer?
You can also release the auto brake manually everytime with the press of a button in the center console.
How do you turn off the automatic parking brake?
And checking the appropriate. Box under the rear parking brake assist automatic braking will now be disabled. Until you come back in and change this setting.
How do I turn off Ford auto hold?
Press the Auto Hold button to switch the system on and off. The Auto Hold indicator light illuminates in the Auto Hold button when the system is on. Note: You can only switch Auto Hold on if you close the door and fasten your seatbelt.
Do electronic parking brakes automatically disengage?
Pros and cons of electronic handbrakes over manual handbrakes. Pros: Always uses enough force to lock the wheels. Automatically disengages when you drive off.
