AHG Auto Service » Make » Ford » How do you turn off anti theft on a 2000 Ford Windstar?

How do you turn off anti theft on a 2000 Ford Windstar?

Turning Off Anti-Theft on a 2000 Ford Windstar
To turn off the anti-theft system on a 2000 Ford Windstar, you can follow these steps:
1. Disconnect and Reconnect the Battery:
– Remove the positive cable from the battery to place the key in the automobile safely.
– Turn the ignition to the on position and then replace the positive cable.
– Turn the key off and on to reset the anti-theft system.
2. Unlocking the Doors:
– Ensure all doors are closed.
– Turn the key to the Run/Start position in the ignition to disable the alarm.
3. Resetting the Anti-Theft System:
– Get in the vehicle and shut all the doors.
– Turn the truck on without starting it, then push the power door unlock button three times before turning the key back to the off position.
– When the truck is off, press the unlock button three more times.
– Turn the truck on again, and you should hear the horn make a noise. Hit the unlock button once more, then turn the car off again. This completes the reset process.
These steps should help in turning off the anti-theft system on your 2000 Ford Windstar. If these methods do not work, it may be necessary to visit a dealership to disarm the anti-theft system and resolve the issue.

How do you reset the theft on a 2000 Ford Windstar?

Press the button marked with a speaker symbol on the key remote to activate the personal alarm. The alarm will sound. Press it one more time, or insert the key into ignition and turn to ‘on’ position. This will reset the system.

How do I get my car out of anti-theft mode with a key?

Leave the key and the dashboard lit for at least 8 minutes. This should make the anti-theft signal, that has been displayed on your dashboard, disappear. If it does, turn off the ignition and let the car rest for a while.

How do I deactivate my anti-theft system?

To get a car out of anti-theft mode with a key, insert the key into the ignition, turn it to the “on” position, and wait for the anti-theft system to deactivate, which may take a few minutes.

How long does it take for the anti-theft system to reset?

Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system. Many manufactures will not allow the car to start when the panic button has been pushed.

Is there a fuse for anti-theft system?

The anti-theft or car alarm fuse is usually found in the fuse box on the driver’s side. In some vehicles, the anti-theft fuse can be in the fuse box under the hood that’s also on the driver’s side. The fuse box should be behind the air filter.

How do I get my Ford out of anti-theft mode?

Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.

Which fuse is for anti-theft?

A: The anti-theft or car alarm fuse is usually found in the fuse box on the driver’s side. It should be directly in front of your left knee covered by a plastic panel. The anti-theft or car alarm fuse is usually found in the fuse box on the driver’s side.

What is the anti-theft symbol on my car dashboard?

It simply mean that anti-theft system of car has been activated. In most cars, after starting, it shows this symbol for few seconds then it disappears. It will again appear when there is any suspicious activity will be done with car.

How do you reprogram the Ford theft system?

The first and easiest thing to try is pressing the alarm button on your key fob which should deactivate the alarm and reset the system. If that doesn’t work, the anti-theft system could have been triggered for a different reason. The next thing you should check is the door lock cylinder to make sure it isn’t damaged.

Why is my car stuck in theft mode?

The Bottomline
The cause can be a simple dead key fob battery or a complicated electrical fault. If your car won’t start because of a bad anti-theft system, you might need to pay a trip to the nearest repair shop or dealership, especially if the system is factory-installed.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment