How do you start a Dodge Ram with a remote?

How to Start a Dodge Ram with a Remote
To start a Dodge Ram with a remote, you can use the remote start feature on your key fob. Here’s how you can do it:
1. Ensure that the vehicle is in Park (P), the doors are closed, the hood is closed, and the hazard switch is off.
2. Make sure that the brake pedal is not pressed, there is no key in the ignition, there is enough gas, and the battery has sufficient charge.
3. Look at your key fob. There should be a button with a x2 symbol and an arrow moving in a circular direction.
4. Press and release the remote start button on the key fob twice within five seconds.
5. You will hear the engine start immediately, and it will continue running for 15 minutes before shutting down. If you want to shut off the engine before the 15-minute cycle ends, simply push the button a third time.
Please note that these instructions may vary depending on the specific model and year of your Dodge Ram. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions tailored to your vehicle.
I hope this helps! Let me know if you have any other questions.

How do I know if my Dodge has remote start?

The key fob for your car will have a special button if your vehicle has a remote starter. The symbol for the remote start is usually an arrow making a partial circle, as seen above. However, take note that some vehicle brands might use a different symbol for remote start.

What is the key inside my key fob for?

IF THE KEY FOB LOSES BATTERY OR SIGNAL POWER
To unlock the door, use the mechanical key inside the key fob: Press the small button on the side or back of the key fob while pulling out the side closest to the button.

Do Rams come with remote start?

Connect to your truck with the available Ram App 6 Through available Ram Connect Services 7, you can send destinations to your available NAV system with Send & Go 8, find your truck with Vehicle Finder 9, use Remote Vehicle Start 10 and lock or unlock your doors—all from the app.

How do you start a keyless car with physical key?

Even in cars that use keyless entry, there is usually a key slot located underneath the car’s start button or a round plastic cap on the steering column. You can pop off the plastic top and use the physical key to start your engine manually.

How do I start my Ram 1500 with physical key?

And take it and push it against the start stop feature on the vehicle. So that it recognizes the fob. And you put your foot on the brake the same as you normally start it and push it. In.

What is the hidden feature of the RAM key fob?

There is a physical key hidden inside of your Ram key fob. If the battery on your key fob is dead, you can still enter, start and fully operate the vehicle with this key. If the battery on the vehicle is dead, this key will also grant you access to the vehicle.

Does Ram 1500 have remote start?

From the RAM app—on your smartphone or smartwatch—you can remote start the truck 3, lock and unlock the doors and even find your truck with Vehicle Finder 4.

How do I activate remote start?

Once started remotely the engine will run for 10 minutes and then shut. Off. You can extend the running time for another 10 minutes by repeating the start procedure during the initial. Period.

Does my Ram 1500 have remote start?

From the RAM app—on your smartphone or smartwatch—you can remote start the truck 3, lock and unlock the doors and even find your truck with Vehicle Finder 4.

Can you remote start a Dodge?

CONVENIENCE AT YOUR COMMAND
Dodge Connect 9 includes Remote Vehicle Operations like vehicle start 12, lock, unlock, plus monthly vehicle health alerts 13, and so much more.