How do you set cruise control on a Subaru?

Setting Cruise Control on a Subaru
To set cruise control on a Subaru, follow these steps:
1. Make sure your vehicle is traveling at a speed of 25 mph or greater. Cruise control cannot be set at speeds lower than 25 mph.
2. Locate the cruise control buttons on your Subaru’s steering wheel. The specific location and design of these buttons may vary depending on the model and year of your Subaru.
3. Press the cruise control button to activate the cruise control system .
4. Once the cruise control system is activated, press the “SET/COAST” button to set your desired cruising speed. This button is used to both set and decrease the speed.
5. The vehicle will now maintain the set speed without the need to press the accelerator pedal. However, keep in mind that the cruise control feature will disengage if you apply the brake .
If you encounter any difficulties in activating the cruise control feature or need further assistance, it is recommended to consult your vehicle’s owner’s manual or contact your Subaru dealership for guidance.
Please note that the steps provided above are general instructions and may vary slightly depending on the specific model and year of your Subaru. It is always best to refer to the owner’s manual for your vehicle for the most accurate and detailed instructions.
I hope this helps! Let me know if you have any other questions.

Does Subaru have cruise control?

Procedure to Set Subaru Cruise Control
On the right side of the steering wheel, you’ll find the control icon indicated by the top arrow (CC icon). You will achieve your cruising pace after pressing the SET/− button in the mid of the screen.

How do you turn on cruise control on a Subaru?

But I want to bump this up a little bit so I’m going to push. And hold it up to increase the speed. We’ll increase it to 75. Right now. But you’ll see it’s uh it’s not going 75.

How to switch between adaptive cruise control and regular cruise control?

Here’s how:

1. Press and hold the Cancel button.
2. After a brief time, the icon in the cluster will switch modes.
3. You’ll see a message in your cluster display that you have switched between cruise control and Adaptive Cruise Control.
4. Pressing and holding the Cancel button will switch between cruise control modes.

How to turn on cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Can you turn off Adaptive Cruise Control and use regular cruise control Subaru?

I don’t want that adaptive cruise control can I just do regular cruise control. And the answer is yes you can see if I hit this button here it turns on the cruise control and you can see right there

How do I set the cruise control on my Subaru Outback?

On. So i can set my speed to my desired speed. And it will not go any higher than that.

How do I set cruise mode?

“Push the ‘CRUISE’ button and accelerate until you reach the desired speed. Pull the lever to ‘SET’ to activate the function. For more details, please refer to your car manual.”

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

Where is the cruise main button located?

steering wheel
Turning the cruise-control system on — generally via a button on the steering wheel — causes the Cruise Main message to display on the dashboard. This doesn’t mean that you can now take your foot off the accelerator pedal. It means the system has been activated and is ready to have its speed set.

Why is my cruise control not working on my Subaru?

The first step is to check the cruise control fuse. Consult your owner’s manual to find the fuse box diagram, and locate the fuse connected to the cruise control system. If it’s blown, you could try replacing the fuse and testing the cruise control. That could be enough to have you cruising in comfort once again!