How do you set cruise control on a Dodge Ram?

To set cruise control on a Dodge Ram, follow these steps:
1. Reach a desired speed: First, reach the speed you want to maintain while driving on the open road.
2. Turn on cruise control: Locate the cruise control button on your Dodge Ram. Press the cruise control button to turn it on.
3. Set the desired speed: Once the cruise control is turned on, press the “Set” button to set the current speed as the desired cruising speed.
4. Adjust the speed: While driving, you can use the “+” or “-” buttons to increase or decrease the speed in increments of 1 MPH.
Please note that the specific location and design of the cruise control buttons may vary depending on the model and year of your Dodge Ram. It’s always a good idea to consult your vehicle’s owner’s manual for detailed instructions on how to operate the cruise control system.
I hope this helps! Let me know if you have any other questions.

How do you use cruise control on a 2017 Ram?

Take your foot off the accelerator. And the vehicle will cruise at the speed you selected to disengage the speed control depress. The brake pedal or push the cancel.

Does Dodge Ram 1500 have Adaptive Cruise Control?

Available Adaptive Cruise Control with Stop & Go 7 detects vehicles ahead and will autonomously adjust your speed to keep you at a safe distance. If increased braking is needed in slower traffic, driver intervention may be required.

Where is my cruise control button?

steering wheel
Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board.

Why does my cruise control not set?

This issue is usually due to a malfunctioning fuse or a communication disruption in your vehicle’s computer. If the latter occurs, you’ll need to replace your vehicle’s speed control assembly. You may also find that the cruise control light does not illuminate when you attempt to activate the system.

How do you set cruise control on a 2018 Dodge Ram?

And the vehicle will cruise at the speed you’ve selected. If you set the system at a speed above 20 miles per hour or 32 km/h. The set speed will be the current speed of the vehicle.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Why can’t I set my cruise control?

Any issues with your car’s electrical components can cause the cruise control to stop working. These issues could be something as simple as a loose wire or connector, or something more complicated like a damaged alternator, starter, or electrical short circuit.

How do you turn on cruise control on a Ram 1500?

To activate cruise control in a RAM 1500, you only need to do the following:

1. While driving, accelerate to the speed that you desire.
2. Push the “Set” cruise control button.
3. Take your foot off the accelerator. The vehicle will cruise at the set speed.

Why is my cruise control not working in my Dodge Ram?

The most common reasons a Dodge Ram 1500 cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.