How do you set cruise control on a Chevy Trailblazer?

Setting Cruise Control on a Chevy Trailblazer
To set cruise control on a Chevy Trailblazer, follow these steps:
1. Set at Standstill:
– On properly equipped 2024 model year vehicles, you can set an Adaptive Cruise Control speed while you’re stopped. The system must be on, you must apply the brake pedal, and your vehicle must be in a forward gear.
– Press the Set button while your foot is on the brake to turn on the feature.
– You can change the set speed, still with your foot on the brake, by pressing the +/resume or -/Set button repeatedly until the system shows your desired speed.
– Then, take your foot off the brake, and the vehicle will hold its position. Once traffic moves, press the resume button, and the vehicle will automatically accelerate to your set speed or following gap if a vehicle is detected ahead.
2. Switching Between Cruise Control Modes:
– On some models, you can switch between Adaptive Cruise Control and cruise control by pressing and holding the Cancel button.
Remember that if you apply your brakes, the cruise control will shut off.
If you encounter any issues with engaging or resuming cruise control after pressing and releasing the brake pedal, it’s advisable to consult a professional for assistance.
I hope this helps you set cruise control on your Chevy Trailblazer!

How do I activate cruise control?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

Where are cruise control buttons?

Typically, the cruise control buttons can be found on the right-hand side of the steering wheel. Depending on the car, the location of the controls can vary, but the functionality of the cruise control will usually be similar across the board. Here are the basic buttons you can use to operate cruise control.

Does the Chevy Trailblazer have cruise control?

Drivers who enjoy adaptive cruise control can have the popular feature added to a few trim levels. Adaptive cruise control is available on the LT and RS. While the feature isn’t available on the LS, an Adaptive Cruise Control package is available on LT.

How do you set cruise control on a trailblazer?

But we want to show you how to use adaptive cruise control. So I’m going to turn it back on and we’re going to hit the road. Let’s Roll check this out we got adaptive cruise control set.

Do all Chevy Trailblazers have cruise control?

All trims come standard with lane departure warnings and lane keeping assist, as well as front pedestrian braking and automatic emergency braking. Upgrade beyond the base trims for blind spot monitoring, adaptive cruise control, lane change alerts and rear cross traffic alerts.

How do I set cruise mode?

Once you’re driving at the desired speed, press the cruise control button to activate the feature. You should see a cruise control indicator light on the dashboard, indicating that the feature is on. After activating cruise control, use the buttons on the steering wheel to set the speed that you want to maintain.

What does the cruise control icon look like?

The cruise control system will often be a speedometer symbol with an arrow pointing to a set speed. It will light up green when it has been successfully set, and an amber or yellow light can indicate that cruise control is enabled but not set, or that there is a problem with the system.

Why can’t I set my cruise control?

Any issues with your car’s electrical components can cause the cruise control to stop working. These issues could be something as simple as a loose wire or connector, or something more complicated like a damaged alternator, starter, or electrical short circuit.

How do you set cruise control on a Chevy?

But it is there. Now there’s a button that’s in the very middle. And that one is going to be the distance indicator or the Gap adjustment.