How do you set cruise control on a 1998 Honda Accord?

Setting Cruise Control on a 1998 Honda Accord
To set the cruise control on a 1998 Honda Accord, you can follow these steps:
1. Get up to your desired speed.
2. Locate the cruise control switch on the left side of the dashboard, to the left of the steering wheel.
3. Press the “Cruise Main” button. This should turn on a green light on the dashboard.
4. Press the “Set” button. Another green light should come on, indicating that the cruise control is set.
5. Take your foot off the gas pedal, and the car should maintain the set speed.
Please note that these steps are based on general instructions for setting cruise control on a Honda Accord. If your specific model or trim level has any variations, it’s always a good idea to consult the owner’s manual for accurate instructions.
I hope this helps! Let me know if you have any other questions.

Why won’t my car let me set cruise control?

Any issues with your car’s electrical components can cause the cruise control to stop working. These issues could be something as simple as a loose wire or connector, or something more complicated like a damaged alternator, starter, or electrical short circuit.

Where is the cruise main button located?

steering wheel
Turning the cruise-control system on — generally via a button on the steering wheel — causes the Cruise Main message to display on the dashboard. This doesn’t mean that you can now take your foot off the accelerator pedal. It means the system has been activated and is ready to have its speed set.

Where is the switch for cruise control?

Locate your car’s cruise control switches.
Usually, these are found either on the steering column (the part connecting the steering wheel to the dashboard area), or on the steering wheel itself. Controls found on the steering wheel usually consist of a few buttons.

How do you set cruise control on a Honda?

Press RES/ACCEL and hold it down. Once you reach cruising speed, you can release the button. Step on the accelerator pedal. When you’ve reached the speed you want, press the DECEL/SET button.

Can a blown fuse cause cruise control not to work?

Blown Fuse
All electrical transmissions in a vehicle are enhanced and controlled by fuses. Once the engine control system detects a defect in the fuse and other electrical components, it sends a check engine warning light to the dashboard and eventually disables the cruise control system.

How do you set the cruise control?

The cruise control icon turns green and confirms the speed we have set. We can now lift our foot from the accelerator.

How do I activate cruise control on my Honda?

You can control cruise control by pressing the Cruise Control Master Button on the steering wheel. On the instrument panel, a light displays CRUISE MAIN. It is desirable to cruise at a speed greater than 25 miles per hour (40 KPH). DECEL/SET buttons are located on the steering wheel.

Why is the cruise control not working on my 1998 Honda Accord?

The most common reasons a 1998 Honda Accord cruise control isn’t working are failed control module, sensor or switch issues, or throttle actuation problems.

How do you set cruise control on Honda Accord?

In either case the ACC icon. Will turn to Green. In addition a vehicle icon interval bars and the set speed appear in the digital instrument cluster.

How do I activate cruise mode?

To use cruise control, you can typically press buttons on your steering wheel to activate the system, set your speed, adjust your speed up or down within the system, and deactivate the system. Using cruise control lets you set a speed for your car to maintain even if you take your foot off the gas.