How do you service the oil message on a Ford Kuga?

To service the oil message on a Ford Kuga, you can follow these steps:
1. Turn off the ignition and close all doors.
2. Turn the ignition key to position II. If your Kuga has push-button start, press and hold the “Start” button for two seconds without touching the brake pedal.
3. For push-start Ford Kuga models, press and hold the start button for approximately two seconds without pressing the brake pedal. Simultaneously, depress both the accelerator and brake pedals. Keep both pedals pressed for 15 to 25 seconds until “Service: Oil reset in progress” appears on the display. Continue holding until the “Service: Oil reset complete” message displays.
It’s important to note that the oil service reminder should be reset after changing the engine oil and oil filter. If you’re unsure about the process or have any concerns, it’s recommended to consult the owner’s manual or contact a Ford dealer for assistance.
I hope this helps! Let me know if you have any other questions.

Can I reset oil change indicator?

Button located on the steering wheel. Select info scroll down until you can select remaining oil life on the menu. Press and hold the center of the thumbnail. Until it says your oil light is 100.

What does oil service now mean?

It is a reminder from the car’s onboard computer system that certain components, such as oil change, air filter replacement, or tire rotation, need attention. The ‘Service Now’ feature is designed to help you keep track of your car’s maintenance schedule and ensure that it is running smoothly.

Does oil service mean oil change?

​A full service of a vehicle typically includes an oil and filter change, a visual inspection of fluid levels and components, a wheel alignment check, a brake inspection, and an inspection of the air filter and other filters.

How do I turn off the oil warning light?

Turn the ignition off. The oil change light should disappear. If the light is still on, try holding both the brake and accelerator pedals while the key is in the on position. Another method is to press and hold the stem (if your vehicle has one) for 10 seconds or until the icon begins flashing.

How do you reset a Ford after an oil change?

And then when you’re told go ahead and hold that reset button down. And now our oil life is set to 100. So there you go.

How do I clear my oil message?

First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.

What does service oil mean on Ford?

If the message is displayed the oil must be changed within 1,000 miles or 1 month (whichever occurs first) and the IOLM should be reset by your Ford dealer. Not changing the oil will lead to premature engine wear, damage or even failure.

How do I reset oil change warning on Ford Kuga?

Start switch it off then come up here you flick it on press and hold the accelerator. And brake at the same time. The service oil reset in progress comes on you keep that held. Down.

Why does my car say change oil soon when I just changed it?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues.

Can you drive with oil service light on?

To make this quick, the answer is NO. It’s not safe to drive with the oil light on. Continuing to drive with the oil light on can cause serious engine damage and even an accident if your vehicle suddenly stops as a result of engine failure.