How do you rotate the tires on a Chevy Malibu?

How to Rotate the Tires on a Chevy Malibu
Rotating the tires on a Chevy Malibu is an important maintenance task that helps to ensure even tire wear and extend the life of the tires. Here’s how you can do it:
1. Rotation Pattern: The standard rotation pattern for a Chevy Malibu is to move the front tires straight back, so the driver’s side front tire becomes the driver’s side rear tire, and the passenger’s side front tire becomes the passenger’s side rear tire. Then, move the back tires forward, but diagonally, so the driver’s side back tire becomes the passenger’s side front tire, and the passenger’s side back tire becomes the driver’s side front tire.
2. Frequency: According to the 2011 Chevrolet Malibu owner’s manual, the tires should be rotated every 7,500 miles or 12,000 km.
3. DIY or Professional Service: You can choose to rotate the tires on your own or visit a service department for this maintenance task. If you prefer to do it yourself, make sure to follow the rotation pattern mentioned above. If you’d rather have a professional handle it, you can contact a Chevrolet service center for assistance.
4. Benefits of Rotation: Regular tire rotation extends the life of your tires and improves performance. It also provides better traction on the road.
5. TPMS: After rotating the tires, it’s important to ensure that the Tire Pressure Monitoring System (TPMS) information is synced correctly. If you encounter issues with TPMS after rotating the tires, consult the owner’s manual for instructions on how to fix it. There are also TPMS relearn devices available for purchase that can help with this process.
Remember to consult your specific owner’s manual for any model-specific instructions or recommendations.
By following these steps, you can effectively rotate the tires on your Chevy Malibu, promoting even tire wear and prolonging the life of your tires.

What is the correct way to rotate tires?

Front-wheel drive : Rotate the tires in a forward cross pattern. This means that the left front goes to the left rear and the right front goes to the right rear. The left rear goes to the right front and the right rear goes to the left front. Rear-wheel drive or AWD/four-wheel drive : Left rear goes to right front.

Can I rotate my tires myself?

For doing your own home tire rotation, you’ll need a car jack, lug nut wrench, and jack stands. A hydraulic floor jack is a lot easier to use than the small scissor jack from your trunk. Only lift the vehicle from solid points, such as the frame. The manual will note specific locations to use the jack on your vehicle.

How do you reset the tire sensors after rotation on a Chevy Malibu?

Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times. Start your vehicle and wait about 20 minutes to allow the sensor to reset. To find your TPMS reset button, check out your vehicle owner’s manual!

How do you rotate the tires on a 2017 Chevy Malibu?

FWD Tires: The tires on FWD vehicles should be rotated by shifting the front tires to the back of the car in the same left/right positions with the rear tires moving to the front and switching right and left tire positions. RWD Tires: For RWD vehicles, the tires should be rotated in the opposite direction.

What is the pattern for Chevy rotation?

Forward Cross: This is a pretty common Chevy tire pattern that many Matthews drivers with front-wheel drive use. For this Chevy tire rotation, you’ll bring the front tires to the back, then bring the rear tires to the front except you’ll switch sides. You’ll put the rear left tire on the right side, then vice versa.

What happens if you rotate your tires incorrectly?

Tires that haven’t been properly rotated can cause a significant amount of vibration or noise due to uneven wear. These symptoms can cause a domino effect and lead to other performance issues, requiring additional maintenance.

How do you rotate tires on a Chevy?

FWD Tires – To rotate tires on FWD vehicles, move the front right and front left tires to the rear right and rear left positions, respectively. When you move the rear tires to the front, switch their right/left positions: rear right to front left, and rear left to front right.

What tire rotation pattern for all wheel drive?

In fact, there is an order to rotating tires on an AWD vehicle and following it is important. To rotate the tires on an all-wheel drive vehicle, you must follow an “X” pattern: the left front tire will go to the right rear and vice versa; the same goes for the right front tire, which will go to the left rear.

Do tires need to be balanced when rotated?

It’s not completely necessary to balance tires when rotating, but it is a good idea to do so. When performed by a shop, the balancing procedure is inexpensive, so its usually paired with the rotation. If you’re doing a rotation job yourself, it’s up to you whether you want to also balance.

How do you rotate the tires on a 2018 Chevy Malibu?

How Often to Rotate Your Tires. Front and rear wheel drive vehicles will typically need a tire rotation done every 5,000 to 7,500 miles. All-wheel drive vehicles require more changes at every 3,000 to 5,000 miles since all tires are actively engaged, which results in faster wear.