How do you reset the transmission control module on a Dodge Charger?

How to Reset the Transmission Control Module on a Dodge Charger
To reset the Transmission Control Module (TCM) on a Dodge Charger, there are a few methods you can try. Here are some options:
1. Disconnect the battery: Disconnect the negative battery terminal for more than 10 minutes. This will allow the TCM to reset when you reconnect the battery and start the car.
2. Pull specific fuses: Some Dodge Charger owners have reported success in resetting the TCM by pulling specific fuses. For example, pulling fuses 11, 14, and 16 and cycling the key has been mentioned as a method to reset the TCM and the Powertrain Control Module (PCM).
3. Use a diagnostic tool: Another option is to use a diagnostic tool, such as an OBD reader, to reset the TCM. This can be done by connecting the tool to the OBD port in the vehicle and following the instructions provided by the tool.
It’s important to note that if you’re experiencing issues with your transmission, it’s recommended to have the vehicle inspected by a qualified mechanic. They will be able to diagnose and address any underlying problems that may be causing the issues.
Please keep in mind that these methods are suggestions based on user experiences and may not work in all cases. It’s always a good idea to consult the vehicle’s manual or reach out to a professional for specific instructions related to your Dodge Charger model.
I hope this information helps! Let me know if you have any other questions.

What are symptoms of a bad transmission control module?

Signs of a Bad Transmission Control Module

• Unpredictable shifting.
• Trouble shifting into higher gear.
• Trouble downshifting.
• Getting stuck in the same gear.
• Poor fuel economy.
• Check engine light comes on.

When should I reset my transmission control module?

Resetting the transmission control module could clear error codes. It makes the TCM forget everything it has previously learned. Some problems you could fix with a simple reset include delayed shifting, a stuck gear, and poor fuel economy. However, do note that resetting the TCM doesn’t always work.

Does a transmission control module need to be reprogrammed?

However, if the TCM itself is at fault, it may need replacement. After the problem has been conclusively diagnosed as a TCM issue, it can be installed easily enough. However, most TCMs will need to be programmed to the vehicle.

What happens if you don’t reprogram transmission?

Neglecting any of the issues could lead to jerking, surging, stuttering, or even engine issues. Additionally, the symptoms above could also be a product of other worn-out components. For example, a stuck gear may also be the result of a contaminated transmission fluid.

How do I manually reset my TCM?

And hold it there for 10 to 20 seconds. While still pressing the pedal down turn off the ignition. Continue holding the gas down for 10 more seconds. Then slowly release the pedal.

How do I reprogram my TCM?

The process to reset the TCM could vary depending on the vehicle, but it usually involves setting the car into Park (P) position, turning the ignition off, and restarting the engine before shifting to Drive (D) mode.

Is there a fuse for the transmission control module?

Check The TCM Fuse
The first thing you should do is check the fuse associated with the TCM. If there’s a blown fuse, then the TCM isn’t working at all. You want to rule out the fuse first before replacing your TCM.

Does unplugging battery reset TCM?

Disconnecting a battery will not typically reset the transmission. While it may reset the vehicle’s computer systems, which could affect how the transmission operates, it does not directly reset the transmission itself [1].

How do I reset my transmission control module?

Turn off your vehicle’s ignition and wait patiently for 5 to 10 seconds. Start the engine and allow it to idle for several seconds. Switch off the ignition and wait patiently for another 30 to 40 seconds. Repeat these steps 2 to 3 times in order to reset your vehicle’s transmission control module.

Can you drive with a bad transmission control module?

You’ll want to get transmission control module problems squared away as soon as you start noticing symptoms like these because of how dangerous they can be to drive with.