How do you reset the TPMS sensor on a Subaru Legacy?

How to Reset the TPMS Sensor on a Subaru Legacy
To reset the TPMS (Tire Pressure Monitoring System) sensor on a Subaru Legacy, you can follow these steps:
1. Inflate all tires to the pressure listed on the vehicle placard.
2. Make sure the vehicle is turned on and not in accessory mode.
3. Use a properly formatted TPMS scan tool or another compatible tool to reset the TPMS system.
Please note that the specific steps may vary depending on the model year of your Subaru Legacy. It is always recommended to consult the vehicle’s owner’s manual for detailed instructions.
If you are not comfortable performing the TPMS reset yourself, it is advisable to take your Subaru Legacy to a dealer or a tire shop for assistance.
Remember, the TPMS warning light may also illuminate if there is a malfunction in the system or if there is a tire puncture. In such cases, it is recommended to have the system checked by a professional.
I hope this helps! Let me know if you have any other questions.

Does Subaru have a TPMS reset button?

Unfortunately, Subaru doesn’t install a TPMS reset switch on cars sold in the U.S. If the warning light remains illuminated even after you’ve confirmed that your tires are inflated to the correct pressure, you’ll need to visit a tire shop or a dealership to have the system reset.

What is the TPMS light on a 2015 Subaru Legacy?

Tire Pressure Monitoring Sensor
If your TPMS sensor has failed or its battery has died, the tire pressure monitoring system warning light will come on. To have your Subaru expertly repaired, count on the experts at your Subaru service department to perform necessary repairs.

How do I manually reset my TPMS sensor?

Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh.

Where is the TPMS reset button located?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

How do you reset the TPMS on a 2015 Subaru?

To reset the tire pressure monitor or tpms system in your 2015 subaru legacy vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.

How do I reset my TPMS 2015?

When entering your vehicle, turn the key to the “On” position, but don’t start the car. Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh.

How do I clear my TPMS warning?

On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.

Can you relearn TPMS sensors without a scan tool?

With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.

How do you reset TPMS if there is no button?

Check your vehicle manual. If your TPMS is indirect, your mechanic / tire shop will need to manually reset the sensors after changing your tires or switching them around. If you have a DIRECT TPMS system, then there is no additional maintenance to reset the system.

Can I reset my TPMS myself?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.