How do you reset the TPMS sensor on a Subaru Impreza?

How to Reset the TPMS Sensor on a Subaru Impreza
To reset the TPMS (Tire Pressure Monitoring System) sensor on a Subaru Impreza, you have a few options depending on the model year and the specific issue you are facing. Here are some methods you can try:
1. Check tire pressure and drive the car: If the TPMS sensor light is on due to a slight decrease in tire pressure, you can try driving the car for a bit. As the tires warm up, the light may go off once they reach the correct pressure. If this doesn’t work, inflate the tires to the recommended pressure.
2. Use a TPMS reset tool: For more accurate and precise resetting of the TPMS sensor, you can use a TPMS reset tool. This tool allows you to scan each sensor and upload the sensor IDs to the system. You can then turn off the ignition, start the vehicle, and drive it for at least 10 minutes at speeds over 30 miles per hour to complete the resetting process.
3. Visit a tire shop or dealership: If the TPMS sensor light remains illuminated even after confirming that the tires are inflated to the correct pressure, you may need to visit a tire shop or a Subaru dealership to have the system reset.
Please note that the availability of a TPMS reset switch or button may vary depending on the specific model and year of your Subaru Impreza. Some models may not have a reset switch, and in such cases, using a TPMS reset tool or seeking professional assistance is recommended.
It’s important to follow the specific instructions provided in the vehicle’s manual or consult with a Subaru dealership for the most accurate and up-to-date information on resetting the TPMS sensor for your Subaru Impreza.
I hope this helps! Let me know if you have any other questions.

How do you fix TPMS malfunction?

However, it’s important to note that replacing the sensor is often the best solution, especially if the TPMS has been damaged or malfunctioning for an extended period. One of the first things you can do is check the battery voltage of the sensor. If the battery is low, replacing it may solve the problem.

Where is the TPMS reset button located?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

How do you reset TPMS if there is no button?

Check your vehicle manual. If your TPMS is indirect, your mechanic / tire shop will need to manually reset the sensors after changing your tires or switching them around. If you have a DIRECT TPMS system, then there is no additional maintenance to reset the system.

Where is the TPMS module on a Subaru?

So and then there’s the module see that stud. There there’s two of those studs Two Nuts uh you do those you can pull it up out of the. Way then the carpet lays back in nice and easy.

Why won t the low tire pressure light reset?

If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.

Can you relearn TPMS sensors without a scan tool?

With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.

How do I manually reset my TPMS sensor?

Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh.

Can I reset my TPMS myself?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.

How do you clear the low tire pressure light on a Subaru?

Unfortunately, Subaru doesn’t install a TPMS reset switch on cars sold in the U.S. If the warning light remains illuminated even after you’ve confirmed that your tires are inflated to the correct pressure, you’ll need to visit a tire shop or a dealership to have the system reset.

What is the TPMS fault on a Subaru Impreza?

If the TPMS light comes on and flashes for one second and then turns off for three, this indicates that something is in fact wrong with your TPMS system, and that it might be time to have our service technicians work their magic. However, if your TPMS comes on and stays on, this is when you should be wary.