How to Reset the TPMS Sensor on a Dodge Durango
To reset the TPMS (Tire Pressure Monitoring System) sensor on a Dodge Durango, you can follow these steps:
1. Inflate all tires: Start by inflating all the tires to the recommended tire pressure. You can find the recommended tire pressure on the placard located in the driver’s side door jamb.
2. Drive the vehicle: After inflating the tires, drive the vehicle at speeds above 30 miles per hour for at least 15 minutes. This will allow the system to receive new readings from all the sensors and turn off on its own.
3. Reset using the TPMS reset button: Another method to reset the TPMS in a Dodge Durango is to put the key in the ignition and turn it to the ON position. Then, hold the TPMS reset button until the tire pressure light blinks three times. After that, start the car and check if the light is off.
It’s important to note that if the TPMS light stays on for more than a week, there may be an issue with the sensor or a tire puncture, and it’s recommended to have the vehicle serviced.
Please keep in mind that these instructions are general guidelines and may vary depending on the specific model year of your Dodge Durango. It’s always a good idea to consult the vehicle’s owner’s manual for detailed instructions or contact a certified Dodge dealership for assistance if needed.
I hope this helps! Let me know if you have any other questions.
Contents
- Where is my TPMS located?
- Where is the TPMS reset button Dodge Durango?
- Can I reset my TPMS myself?
- Where is the TPMS reset button on a 2016 Dodge Durango?
- How do you reset the TPMS on a 2015 Durango?
- How do I clear my TPMS check?
- Where is the TPMS reset button?
- Do TPMS sensors reset themselves?
- Why won t my tire pressure light go off even though pressure is fine?
- How do you reset the TPMS on a 2016 Durango?
Where is my TPMS located?
The tire pressure sensor is typically found within the tire itself, mounted on the wheel assembly. These sensors relay crucial information to the vehicle’s computer, triggering the tire pressure sensor light when a discrepancy is detected.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Check for holes, in case You run over a pothole. To reset the tire pressure monitor or tpms system in your 2016 dodge durango vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.
How do you reset the TPMS on a 2015 Durango?
15 miles per hour or 24 km/h for the system to reset. The warnings may stay on however. Until all tires have been properly inflated. And here’s a cool feature.
How do I clear my TPMS check?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Do TPMS sensors reset themselves?
Once you’ve made your stop to fill your tires, the tire pressure light should reset itself automatically. Yet, if you still find the TPMS light on, there are a couple ways for how to reset the tire pressure light: Hop on the Brandon highway and drive at or above 50 mph.
Why won t my tire pressure light go off even though pressure is fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
How do you reset the TPMS on a 2016 Durango?
Please refer to the instruction manuals on the owner’s information DVD. Or dodge.com en owners slash manuals for complete details and other important safety information.