AHG Auto Service » Make » Chevrolet » How do you reset the TPMS sensor on a Chevy Cruze?

How do you reset the TPMS sensor on a Chevy Cruze?

How to Reset the TPMS Sensor on a Chevy Cruze
To reset the TPMS sensor on a Chevy Cruze, you can follow these steps:
1. Access the Tire Pressure Menu: Use the controls on the steering wheel to navigate to the tire pressure menu.
2. Activate Tire Learning Mode: Hold down the reset button until you see a message indicating “Tire Learning Active”.
3. Use TPMS Tool: Place the TPMS tool close to the valve stem of the car. You should hear a horn confirmation for the sensor ID code. Perform the 5-step procedure on the passenger side front, rear tire, and then the driver’s side rear tire.
4. Perform TPMS Reset After Tire Replacement: It is recommended to perform a TPMS reset after a wheel or sensor replacement. Use the appropriate TPMS activation tool for the specific relearn procedures, as mentioned in the owner’s manual for the VT36, VT31, or VT15 tools.
5. Additional Tips: If you rotate or replace the tires on the Chevy Cruze, you may need to reset the Tire Pressure Monitoring System (TPMS). GM didn’t make it very easy to reset the system, but it can be done without having to go to the dealership.
Remember, these steps are specific to the Chevy Cruze and are intended to ensure the proper functioning of the TPMS.

Why won t my tire pressure light go off even though pressure is fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

How do I auto reset my TPMS?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.

How do I manually reset my TPMS sensor?

Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle’s owner’s manual for more details or go to owners.honda.com for a downloadable version.

How do I reset my Chevrolet TPMS?

After you inflate your tires, drive at 50 mph or above (in an appropriate speed zone) for 10 minutes to reset your sensor. The TPMS light should go away. Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times.

How do you reset the tire pressure sensor on a Chevy?

And then the passenger side front. You go through all of them and it’ll reset your tire pressures. And tell the system which position each tire is in if you’ve rotated the tires recently.

Will the TPMS sensor reset itself?

Once you’ve made your stop to fill your tires, the tire pressure light should reset itself automatically. Yet, if you still find the TPMS light on, there are a couple ways for how to reset the tire pressure light: Hop on the Brandon highway and drive at or above 50 mph.

Where is the TPMS reset button on Chevy Cruze?

Options. So you want to reach tire pressure. And once you are here you will press and hold this uh button on the side hold it for maybe five seconds. Now on your vehicle.

Where is the TPMS reset located?

It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds.

How do you clear the service tire monitor on a Chevy?

First, try to fill up your tires with air and see if the TPMS light goes off. If not, drive around for 5-10 minutes at a minimum of 50 MPH. Turn your car off, and then turn the key to the “On” position without starting the car. Hold down the TPMS reset button until you see the tire pressure light blink three times.

What is the service tire monitor system on a 2014 Chevy Cruze?

A Chevy “service tire monitor system” warning can mean one of two things. The first is that your tire pressure is suboptimal and requires adjusting to manufacturer-recommended levels. The second meaning applies if the warning does not go away after filling the tires or if a flashing TPMS light accompanies it.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment