How to Reset the TPMS Sensor on an Acura
To reset the TPMS (Tire Pressure Monitoring System) sensor on an Acura, you can follow these steps:
1. Check the Acura Owner’s Manual: The first step is to consult the owner’s manual of your Acura vehicle. It will provide specific instructions on how to reset the TPMS sensor and the location of the TPMS reset button, if applicable.
2. Inflate and Deflate Tires: Inflate all tires that have a sensor (including the spare tire) to 3 psi over the recommended pressure. Then, completely deflate the tires before filling each one to the correct pressure.
3. Drive the Vehicle: After inflating the tires to the correct pressure, drive the vehicle for at least 40 seconds at a speed of 15 mph (24 km/h) or more. This will allow the TPMS system to automatically memorize the sensor IDs and reset itself.
4. Use a TPMS Tool: In some cases, a TPMS tool may be required to reset the TPMS sensor. This tool is typically used by professional auto or tire service centers. If you don’t have access to a TPMS tool, it is recommended to visit a professional service center for assistance.
It’s important to note that the specific steps to reset the TPMS sensor may vary depending on the model and year of your Acura vehicle. Therefore, it is always best to refer to the owner’s manual for accurate instructions.
Please let me know if you need any further assistance!
Contents
- How do you turn off the TPMS light on a Acura?
- Where is the Acura TPMS reset button?
- How do you manually reset TPMS?
- Where is the TPMS button located?
- Where is TPMS reset button?
- Can I reset my TPMS myself?
- How do you manually turn off TPMS light?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is my TPMS located?
- Why is my TPMS light on in my Acura?
How do you turn off the TPMS light on a Acura?
Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.
Additionally, you can also utilize the TPMS reset button located under your steering wheel. Reference your owner’s manual to find its exact placement. With the vehicle off, turn the key to “on.” Now, press and hold the reset button until it blinks three times.
How do you manually reset TPMS?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How do you manually turn off TPMS light?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Where is my TPMS located?
The tire pressure sensor is typically found within the tire itself, mounted on the wheel assembly. These sensors relay crucial information to the vehicle’s computer, triggering the tire pressure sensor light when a discrepancy is detected.
Why is my TPMS light on in my Acura?
Any time that the TPMS warning light comes ON, there is a possible low tire pressure condition. Tire pressure can drop due to cold conditions, and this drop in pressure may cause the TPMS light to come ON. As the tire warms up under normal driving conditions, the light may turn OFF.
