How to Reset TPMS on a Toyota Land Cruiser
To reset the TPMS (Tire Pressure Monitoring System) on a Toyota Land Cruiser, you will need a TPMS tool and OBD II module, or another properly formatted TPMS scan tool. Here are the steps to reset the TPMS on a Toyota Land Cruiser:
1. Use of TPMS Tool and OBD II Module: A TPMS Tool and OBD II Module, or another properly formatted TPMS scan tool, are required to perform the reset procedure for the TPMS service maintenance indicator warning light on Toyota Land Cruiser for the year 2005, 2006, 2007, 2008, and 2019.
2. Pressing the TPMS Reset Button: If your vehicle has an ignition button, press the POWER button twice without touching the brake pedal. For the latest generation of the Toyota Land Cruiser (2007-2021 model years), the vehicle will be equipped with a TPMS reset button. Press and hold the button until the TPMS indicator light blinks slowly three times. Wait for several minutes with the engine running, and then turn the vehicle off. The system has been initialized.
3. Initialization Failure: If the tire pressure warning light does not blink slowly three times when you push and hold the reset switch, initialization has failed, and the TPMS may not work properly. In this case, initialize the system again.
4. Spare Tire Error: If you replaced a wheel, tire, TPMS sensor, etc., and are now getting a warning light on your car, then the sensor needs to be reset.
5. Direct and Indirect TPMS: Land Cruisers have a MAIN/2nd switch, allowing the owner to have two different sets of tires and wheels with two different sets of TPMS valve/sensor ID numbers. The direct TPMS system for the Toyota Land Cruiser uses a button labeled SET located below the steering column or in the glove box to reset the system.
Remember to follow these steps carefully to ensure the successful reset of the TPMS on your Toyota Land Cruiser.
Contents
- Can I reset my TPMS myself?
- Can you relearn TPMS sensors without a scan tool?
- Where is the Toyota TPMS button?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is my TPMS located?
- Where is the Toyota TPMS reset button?
- Why is my TPMS light on but tires are fine?
- How do you reset TPMS if there is no button?
- Where is the TPMS reset button located?
- How do I clear the TPMS warning?
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Can you relearn TPMS sensors without a scan tool?
With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.
You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times. Wait for several minutes with the engine running, to allow the system to record each tire’s pressure, then turn the engine off.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Where is my TPMS located?
The tire pressure sensor is typically found within the tire itself, mounted on the wheel assembly. These sensors relay crucial information to the vehicle’s computer, triggering the tire pressure sensor light when a discrepancy is detected.
It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it.
Why is my TPMS light on but tires are fine?
However, sometimes the light is trying to indicate other signals apart from the tire pressure. For instance, extreme cold or hot temperatures can also be the reason why your TPMS light turns on. This is due to the contraction that an extreme temperature causes when you are trying to drive in the cold or heat.
What you could do next you could take it for a quick spin. Just around the building or so just so the wheels turn. And that will be that will flash and it will stop.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
How do I clear the TPMS warning?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
