How do you reset the TPMS on a Lexus RC?

How to Reset TPMS on a Lexus RC
If the TPMS (Tire Pressure Monitoring System) light remains on in your Lexus RC, you can reset it yourself or have a service technician reset it for you. Here’s how you can reset the TPMS on a Lexus RC:
1. Check Tire Pressure:
– The TPMS light turns on when it detects that your car’s tires are below the threshold of safe tire pressure. It can also turn on if it detects bad traction, poor fuel economy, or a blowout. If you notice a flashing tire pressure light, make sure to stop at a gas station or service center to have your tires properly inflated.
2. Reinflate Tires:
– Most of the time, reinflating cold tires to their recommended PSI and driving off is enough to shut off the TPMS warning light. Ensure that the tires are filled to the appropriate air pressure when they are cold or when the vehicle has been sitting for at least a few hours.
3. Reset TPMS:
– Once you have filled the tires to the correct pressure, you’ll need to reset the Lexus tire pressure sensor. Here are the general steps to reset the TPMS on a Lexus:
– Turn the engine switch to Ignition ON mode.
– Use the arrow keys to filter through your vehicle’s settings on the multi-information display until you see the TPMS screen.
– Hold down the pressure warning reset switch (located on the lower driver side dash panel or in the glove box) until the TPMS indicator blinks 3 times.
4. Use TPMS Relearn/Reset Tool:
– You can also use a TPMS reset tool specifically designed for Lexus vehicles to reset all tire sensors easily in just a few steps after tire rotation or tire change. This tool is simple, fast, and easy to use, activating each individual TPMS sensor with the press of a button.
Remember, if you encounter any issues with the TPMS light or tire pressure readings, it’s advisable to consult a professional service technician for assistance.
I hope this helps you effectively reset the TPMS on your Lexus RC!

Why is my tire pressure light still on after filling tires?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

How do you reset TPMS if there is no button?

Check your vehicle manual. If your TPMS is indirect, your mechanic / tire shop will need to manually reset the sensors after changing your tires or switching them around. If you have a DIRECT TPMS system, then there is no additional maintenance to reset the system.

Can I reset my TPMS myself?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

How do you reset the TPMS on a 2015 Lexus RC F?

Figure 1: Identifying the data link connector terminals.

• Set the tire pressure to the specified value.
• Turn the engine switch on (IG).
• Press and hold the tire pressure warning reset switch for 3 seconds or more until the tire pressure warning light blinks 3 times (see Figure 2).

Where is the TPMS reset button located?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Why won t my tire pressure light go off even though pressure is fine?

If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.

How do you reset the TPMS on a Lexus rc350?

With the vehicle off, turn the key to the “On” position, but don’t start the car. Hold down the TPMS reset button until the flashing tire pressure light blinks three times. Then release it. Ignite the engine and wait 20 minutes.

How do you reset the TPMS on a Lexus RC 350?

With the vehicle off, turn the key to the “On” position, but don’t start the car. Hold down the TPMS reset button until the flashing tire pressure light blinks three times. Then release it. Ignite the engine and wait 20 minutes.

How do I clear the TPMS warning?

On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.

How do I reset my Lexus TPMS?

Using the TPMS Reset Button
Turn the vehicle’s ignition to “on” without starting the engine; hold the TPMS reset button until the light flashes three times and release the button. Start the car and give it about 20 minutes—the warning light should disappear.