How to Reset the TPMS on a Honda Ridgeline
To reset the TPMS (Tire Pressure Monitoring System) on a Honda Ridgeline, you can follow these steps:
1. Check the Tire Pressure: Before resetting the TPMS, make sure to check the tire pressure in all four tires and ensure they are properly inflated to the recommended levels.
2. Access the TPMS Calibration Menu: The process for accessing the TPMS calibration menu may vary depending on the model year and technology of your Honda Ridgeline. Here are two common methods:
– For models with a touchscreen display:
– From the Home screen, select Settings.
– Select Vehicle.
– Select TPMS Calibration.
– Select Calibrate.
– Select TPMS Calibration.
– For models with a TPMS button:
– Locate the TPMS button, which is usually located to the left of the steering wheel.
– Press and hold the TPMS button until the TPMS warning light blinks twice.
3. Drive the Vehicle: After initiating the TPMS calibration, you will need to drive the vehicle for approximately 30 minutes at speeds between 30-65 miles per hour. This will allow the TPMS to recalibrate and reset itself.
4. Verify TPMS Reset: Once you have completed the driving process, the TPMS should reset, and the warning light should turn off. You can verify the reset by checking if the TPMS warning light is no longer illuminated on the instrument panel.
It’s important to note that if the TPMS warning light remains on after following these steps, there may be an issue with the system, and it is recommended to have the vehicle inspected by a Honda Certified Technician.
Please keep in mind that the specific steps may vary depending on the model year and technology of your Honda Ridgeline. It’s always a good idea to consult your vehicle’s owner’s manual for the most accurate and up-to-date instructions.
I hope this helps! Let me know if you have any other questions.
Contents
- Does Honda TPMS reset automatically?
- Can I reset my TPMS myself?
- Where is the TPMS reset button on a Honda Ridgeline?
- Where is TPMS reset button?
- How do you manually reset TPMS?
- How do I reset my Honda TPMS?
- How do I clear my TPMS warning?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is the TPMS button located?
- How do I manually reset my TPMS sensor?
Does Honda TPMS reset automatically?
After you’ve had the chance to fill up your tires to the proper level, here’s how to reset the tire pressure light in your Honda CR-V below in a few simple steps: Drive at or above 50 mph to reset the sensor for 10 minutes. This can cause your sensor to reset the next time you turn on the car.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How to Reset Tire Pressure Monitoring System in Newer Honda Vehicles
- From the home screen, select Settings.
- Select Vehicle.
- Select TPMS Calibration.
- Select Calibrate.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
How do you manually reset TPMS?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it.
How do I reset my Honda TPMS?
Within a few miles of driving. See your vehicle’s owner’s manual for even more. Details. You can download one at my garage.honda.com.
How do I clear my TPMS warning?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
How do I manually reset my TPMS sensor?
Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh.
