To reset the TPMS (Tire Pressure Monitoring System) on a Ford Ecosport, you can follow these steps:
1. Activate TPMS reset mode: Park your vehicle and turn the ignition to the ACCESSORY mode. Use the up arrow button on the steering wheel to scroll to the Settings menu. Press the Menu button with three vertical dots and three horizontal lines. Use the down arrow button to scroll to Information. Scroll to the Tire Pressure menu and press OK.
2. Re-train each tire pressure sensor: Hold down the OK button to reset the TPMS. This will retrain each of your vehicle’s tire pressure sensors.
Please note that these instructions are based on the Ford Ecosport owner’s manual and should apply to the second generation of Ford Ecosport (2013-2021 model years).
It’s important to reset the TPMS after getting a tire rotation or adjusting tire pressure to ensure accurate readings. If you’ve recently had a tire rotation, you may notice that the TPMS display shows the tire positions incorrectly. Resetting the TPMS will help it relearn the new positions of your tire sensors.
Remember, if you encounter any issues or the TPMS light remains on after following these steps, it’s recommended to consult a Ford service center for further assistance.
Let me know if there’s anything else I can help you with!
Contents
- How do you relearn a Ford TPMS sensor?
- Where is the TPMS reset button on Ford Ecosport?
- How do I put my Ford into TPMS training mode?
- Where is my TPMS located?
- Why won t my tire pressure light go off even though pressure is fine?
- How do you relearn a Ford TPMS with a push button start?
- How do I manually reset my Ford TPMS?
- How do you reset the TPMS light on a dashboard?
- Can I reset my TPMS myself?
- Where is the TPMS reset button?
How do you relearn a Ford TPMS sensor?
How to enter the Ford TPMS learning mode?
- Make the gear in P position.
- Ignition switch to OFF, press and release the brake pedal.
- Turn ignition switch from OFF position to RUN position 3 times and nd at RUN position.
- Depress and release the brake pedal.
- Ignition to OFF position.
Generally, you’ll find the reset button under the steering wheel.
How do I put my Ford into TPMS training mode?
Sensor Training
Turn the ignition to the OFF position. Turn the ignition to the RUN position three times, ending in the RUN position. Do not wait more than two minutes between each key cycle.
Where is my TPMS located?
Where is the Tire Pressure Sensor Located? Typically, each wheel on your vehicle has a tire sensor mounted on the inside of the tire. Many vehicles use a specially designed tire valve that has the sensor integrated. Other vehicles may have the pressure sensor mounted to the inside of the wheel.
Why won t my tire pressure light go off even though pressure is fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
Manual relearn procedure (push-button start):
With the vehicle OFF, push and release the brake pedal. Push START button 5 times (NOTE: 8 times if 2x-to-RUN) Press and release the brake pedal. Push START button 6 times (NOTE: 9 times if 2x-to-RUN)
How do I manually reset my Ford TPMS?
And this procedure. Works just fine for that car as it does this car. So this is an automatic ford escape 2013 push button start.
How do you reset the TPMS light on a dashboard?
Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh. If you have problems locating the tire pressure monitor, check the vehicle’s owner’s manual.
Can I reset my TPMS myself?
Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car. With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
