How to Reset the Tire Pressure Sensor on a Honda Ridgeline
To reset the tire pressure sensor on a Honda Ridgeline, you can follow these steps:
1. Check the Tire Pressure: Start by checking the tire pressure in all four tires. Make sure they are properly inflated to the recommended air pressures labeled within the door jamb.
2. Drive the Vehicle: After inflating the tires to the correct pressure, drive the vehicle for at least 15 minutes at a speed of 30 MPH or more. This will allow the system to learn the new sensor IDs.
3. Scan Each Sensor: Using a properly formatted TPMS scan tool, scan each sensor in the following order: LF (left front), RF (right front), RR (right rear), LR (left rear), and the full-size spare if equipped.
4. Turn Off the TPMS Light: To turn off the flashing TPMS light, scan each sensor again and drive the vehicle for at least 10 minutes at a speed of 30 MPH or more.
Please note that a properly formatted TPMS scan tool may expedite the relearn process, but it is not necessary.
It’s important to keep in mind that the steps to reset the tire pressure sensor may vary depending on the model year of your Honda Ridgeline. If you have a newer model, you may need to access the TPMS calibration settings through the touchscreen display.
If you are still experiencing issues with the TPMS light after following these steps, it is possible that there may be a malfunction in the sensors or the ECM. In such cases, it is recommended to bring the vehicle to a Honda dealership or a certified technician for further assessment and scanning for any inoperable sensors.
Remember to always refer to your vehicle’s owner’s manual for specific instructions and guidelines.
I hope this helps! Let me know if you have any other questions.
Contents
- Does Honda TPMS reset automatically?
- Can I reset my TPMS myself?
- Where is the TPMS reset button on a Honda Ridgeline?
- Where is the TPMS reset button?
- How do you manually reset TPMS?
- What’s the difference between TPMS light and tire pressure light?
- How do I reset my Honda TPMS?
- How do I manually reset my TPMS sensor?
- Why won t my tire pressure light go off even though pressure is fine?
- Why is my TPMS light on but tires are fine?
Does Honda TPMS reset automatically?
After you’ve had the chance to fill up your tires to the proper level, here’s how to reset the tire pressure light in your Honda CR-V below in a few simple steps: Drive at or above 50 mph to reset the sensor for 10 minutes. This can cause your sensor to reset the next time you turn on the car.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How to Reset Tire Pressure Monitoring System in Newer Honda Vehicles
- From the home screen, select Settings.
- Select Vehicle.
- Select TPMS Calibration.
- Select Calibrate.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
How do you manually reset TPMS?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it.
What’s the difference between TPMS light and tire pressure light?
What is the Difference Between a TPMS Light and a Tire Pressure Light? The tire pressure light is just one part of the TPMS system. It is an indicator on your dash that lights up when your tire pressure is low. The TPMS light, available in some vehicles, may light up indicating an issue with the system.
How do I reset my Honda TPMS?
Within a few miles of driving. See your vehicle’s owner’s manual for even more. Details. You can download one at my garage.honda.com.
How do I manually reset my TPMS sensor?
Press and hold the TPMS reset button, and when the tire pressure light blinks three times, release the button. Next, start the vehicle and after 20 minutes, the sensor should refresh.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Why is my TPMS light on but tires are fine?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
