How do you reset the tire pressure sensor on a Dodge Nitro?

How to Reset the Tire Pressure Sensor on a Dodge Nitro
To reset the tire pressure sensor on a Dodge Nitro, you can follow the steps below:
1. Inflate All Tires: Inflate all tires to the pressure listed on the placard.
2. Turn Ignition On: Turn the ignition to the ON position with the engine OFF (not the ACC position), and roll the driver’s side window down.
3. Let the Vehicle Sit: Let the vehicle sit for 20 minutes with the ignition ON. Turn the climate controls/NAV system OFF to limit battery drain.
4. Drive the Vehicle: Drive the vehicle above 15 MPH for at least 20 minutes. All sensor IDs will be memorized automatically.
5. Re-scan Each Sensor: With the ignition still in the ON position, re-scan each sensor.
6. Monitor the Low Tire Pressure Monitor: Drive the vehicle above 15 MPH for at least 20 minutes and monitor the low tire pressure monitor to ensure it does not blink.
It’s important to ensure that the tire pressure is correct before attempting to reset the TPMS. If the low tire pressure light does not turn off automatically after reinflating the tires, you may need to increase the tire pressure by 5 psi on top of the factory recommended value and drive your vehicle for at least 10 miles (16 km).

Contents

How do I clear my TPMS check?
Where is the TPMS reset button?
Why won t my tire pressure light go off even though pressure is fine?
Will my TPMS reset itself?
What is TPM system Dodge Nitro?
How do you reset the TPMS light after filling tires?
Can I reset my TPMS myself?
Where is the TPM sensor?
How do I reset the Dodge Nitro TPMS?
How do you fix a TPM malfunction?

How do I clear my TPMS check?

On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.

Where is the TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Why won t my tire pressure light go off even though pressure is fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

Will my TPMS reset itself?

Once you’ve made your stop to fill your tires, the tire pressure light should reset itself automatically. Yet, if you still find the TPMS light on, there are a couple ways for how to reset the tire pressure light: Hop on the Brandon highway and drive at or above 50 mph.

What is TPM system Dodge Nitro?

Your vehicle is equipped with a tire-pressure-monitoring. System or tpms. It measures pressure in your four Road tires and sends the tire pressure readings to your vehicle.

How do you reset the TPMS light after filling tires?

With the vehicle off, turn the key to the “ON” position, but do not start it. Hold the TPMS reset button until you see the flashing tire pressure light blink three times. Then release the reset button. Start the car and give it about 20 minutes for the sensor to refresh.

Can I reset my TPMS myself?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

Where is the TPM sensor?

So, where is the location of tire pressure sensor? In most cases, they are attached to the valve stem or banded to the wheel inside the tire. By figuring out the exact TPMS sensor location, drivers can better maintain their vehicle’s tire health and ensure a safe and efficient journey throughout.

How do I reset the Dodge Nitro TPMS?

With your engine off, turn the key to the “On” position, but don’t start the vehicle. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start your car and wait 20 minutes for the TPMS sensor to refresh. The TPMS reset button is usually located beneath the steering wheel.