How do you reset the tire pressure sensor on a Chevy Equinox?

How to Reset the Tire Pressure Sensor on a Chevy Equinox
To reset the tire pressure sensor on a Chevy Equinox, you can follow these steps:
1. Check the tire pressure: Before resetting the sensor, make sure to check the tire pressure in all four tires. Use a tire pressure gauge to ensure that the tire pressure matches the recommended levels specified on the tire placard.
2. Turn off the ignition: Once you have checked the tire pressure, turn off the ignition of your Chevy Equinox.
3. Reset each tire: Start by resetting the driver side front tire. To do this, you will need to let air out of the tire until the horn chirps twice. Then, move on to the passenger side front tire and repeat the process. After that, reset the passenger side rear tire, followed by the driver side rear tire. For each tire, you will need to let air out until the horn chirps twice.
4. Turn off the ignition: After resetting the last tire, turn off the ignition of your Chevy Equinox.
5. Adjust the tire pressure: Finally, adjust the tire pressure in all four tires to the recommended levels specified on the tire placard.
Please note that these instructions are based on the Chevy Equinox owner’s manual and should apply to the first, second, and third generations of the Chevy Equinox (2008-2021 model years).
It’s important to note that if you are experiencing issues with the tire pressure monitoring system (TPMS) in your Chevy Equinox, it is recommended to have the system checked by a professional technician. They will be able to diagnose and address any underlying issues with the TPMS.
I hope this helps! Let me know if you have any other questions.

Where is the TPMS button on a equinox?

And then what you’ll do is you’ll hold the checkmark button for a few seconds. And you’ll hear the one that lets you know that you’re in entire learning active.

How do you reset the tire pressure light on a Chevy Equinox?

After you inflate your tires, drive at 50 mph or above (in an appropriate speed zone) for 10 minutes to reset your sensor. The TPMS light should go away. Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times.

Where is the TPMS reset button in a 2018 Chevy Equinox?

How do you reset the tire pressure sensor on a Chevy? Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is usually located beneath the steering wheel.

How do you reset the tire pressure sensor on a Chevy?

And then the passenger side front. You go through all of them and it’ll reset your tire pressures. And tell the system which position each tire is in if you’ve rotated the tires recently.

Can I reset my tire sensors myself?

Once you have properly inflated your tires, the tire pressure light should automatically go off. However, if it doesn’t, there are a few different things that you can try: Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car.

Why is my tire pressure light still on after filling tires?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

Can I reset my TPMS myself?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

Why won t my tire pressure light go off even though pressure is fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

Where is my TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

What does it mean when it says service tire monitor system on a Chevy Equinox?

A Chevy “service tire monitor system” warning can mean one of two things. The first is that your tire pressure is suboptimal and requires adjusting to manufacturer-recommended levels. The second meaning applies if the warning does not go away after filling the tires or if a flashing TPMS light accompanies it.