To reset the tire pressure sensor on a Chevy 3500, you can follow these steps:
1. Check the owner’s manual: The specific procedure for resetting the tire pressure sensor may vary depending on the model and year of your Chevy 3500. It’s always a good idea to consult the owner’s manual for the correct instructions.
2. Inflate the tires: Ensure that all tires are properly inflated to the recommended pressure. This step is important because the sensors need to be calibrated correctly.
3. Locate the reset button: Some Chevy models have a reset button for the tire pressure sensor. Check the dashboard or center console for a button labeled “TPMS” or “Reset”.
4. Press and hold the reset button: If your Chevy 3500 has a reset button, press and hold it until the tire pressure light blinks three times. This indicates that the sensor has been reset.
5. Drive the vehicle: After resetting the tire pressure sensor, drive the vehicle for a few miles to allow the system to recalibrate. The tire pressure light should turn off if the reset was successful.
If the above steps don’t work or if your Chevy 3500 requires a different procedure, it’s recommended to consult a certified Chevy repair center or your local Chevrolet service department for assistance.
Remember, it’s always important to refer to the specific instructions in your owner’s manual for the most accurate and up-to-date information on resetting the tire pressure sensor on your Chevy 3500.
Contents
- How do I manually reset my TPMS sensor?
- How do you reset the TPMS on a 2018 Chevy Express 3500?
- Where is the TPMS reset light?
- Where is the reset button on a Chevy TPMS?
- Where is the tire pressure sensor reset button located?
- Where is the tire pressure reset button?
- Can I reset my TPMS myself?
- How do you reset the tire pressure light on a Chevy Silverado?
- How do you reset the TPMS on a 2016 Chevy Express 3500?
- Where is the TPMS button located?
How do I manually reset my TPMS sensor?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle’s owner’s manual for more details or go to owners.honda.com for a downloadable version.
How do you reset the TPMS on a 2018 Chevy Express 3500?
With the car off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times and then release it. Start the car and wait 20 minutes for the sensor to refresh.
Where is the TPMS reset light?
Locate the TPMS reset button. It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds.
The TPMS sensor should refresh within 20 minutes. The TPMS reset button is usually located underneath the steering wheel, but check your owner’s manual for its exact location.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
How do you reset the tire pressure light on a Chevy Silverado?
After you inflate your tires, drive at 50 mph or above (in an appropriate speed zone) for 10 minutes to reset your sensor. The TPMS light should go away. Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times.
How do you reset the TPMS on a 2016 Chevy Express 3500?
When the vehicle is off, turn the key to the “On” position, but don’t start the car. Find the TPMS reset button, usually under the steering wheel, and hold it down until the light flashes three times. Start the car and let it run for 20 minutes to give the sensor time to reset.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
