To reset the tire pressure sensor on an Acura TSX, you can follow these steps:
1. Check tire pressure: Before resetting the sensor, it’s important to ensure that all tires are properly inflated to the recommended pressure. You can find the recommended pressure listed on the placard, which is usually located on the driver’s side door jamb or in the owner’s manual.
2. Reset procedure: The reset procedure may vary depending on the model year and type of TPMS system used in your Acura TSX. Here are a few methods you can try:
– Indirect TPMS system: If your Acura TSX uses an indirect TPMS system, you can reset the sensor by driving the vehicle for at least 40 seconds at a speed of 30 MPH or more. During this time, the sensor IDs will be automatically memorized.
– Direct TPMS system: If your Acura TSX uses a direct TPMS system, resetting the sensor may involve pressing a reset button on the dashboard or following a menu in the vehicle’s settings. Consult your owner’s manual for specific instructions on how to reset the TPMS sensor.
– TPMS reset button: Some Acura TSX models may have a TPMS reset button located near the steering wheel. To reset the sensor using this button, turn the ignition to the “ON” position without starting the vehicle. Then, press and hold the TPMS reset button until you see the tire pressure light blink three times. Release the button and start the vehicle. Wait for at least 20 minutes for the sensors to refresh, and the TPMS should be successfully reset.
3. Professional assistance: If you’re unsure about the reset procedure or if the tire pressure light continues to flash even after attempting a reset, it’s recommended to schedule a service appointment at an authorized Acura dealership or a professional auto or tire service center. They can diagnose any issues with the TPMS sensors or the sensor battery and provide the necessary assistance.
Remember, it’s important to maintain proper tire pressure for optimal safety and performance of your vehicle. Regularly check your tire pressure and address any issues promptly to ensure a smooth and safe driving experience.
Contents
- What is TPMS on Acura TSX?
- Why is my tire pressure light still on after filling tires?
- Where is the TPMS sensor button located?
- Can I reset my TPMS myself?
- Do all cars have TPMS reset button?
- Is it OK to drive with TPMS light on?
- How do you clear a tire pressure sensor?
- How do you reset the tire pressure sensor on a Acura?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is the TPMS reset button?
What is TPMS on Acura TSX?
Tire Pressure Monitoring System (TPMS)
TPMS turns on every time you start the engine, then monitors the tire pressure in each of your tires while driving. Using location and pressure indicators, this system monitors tire pressure, and allows you to check tire pressure from inside the vehicle.
Why is my tire pressure light still on after filling tires?
The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.
It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it. Release the TPMS reset button after three seconds.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
It is worth pointing out that not all vehicles have a TPMS reset button, and the system may automatically reset itself once the tyre pressure is adjusted correctly. If you’re uncertain if your vehicle has a reset button, refer to the owner’s manual or get help from a local dealership.
Is it OK to drive with TPMS light on?
As we mentioned earlier, a tire pressure light is a warning, not a command, so you don’t need to pull over immediately if you see it come on. However, driving on underinflated tires can be dangerous and can cause a variety of problems, including poor handling, reduced fuel efficiency, and increased tire wear.
How do you clear a tire pressure sensor?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
How do you reset the tire pressure sensor on a Acura?
Turn the key to “On” (one position to the right), but don’t start the car. Now hold down the “TPMS Reset” button until the flashing tire pressure light blinks three times. Start the engine and wait 20 minutes. Check your owner’s manual if you have trouble finding the reset button.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
