How to Reset the Tire Pressure Sensor on an Acura ILX
To reset the tire pressure sensor on an Acura ILX, you can follow these steps:
1. Check the tire pressure: Before resetting the sensor, ensure that all tires are properly inflated to the recommended pressure listed on the tire placard.
2. Drive at high speed: Take a drive on a highway or road at or above 50 mph for at least 10 minutes. This can cause the sensor to reset the next time you turn on the car.
3. For older Acura cars with turn-key ignitions: Turn the key to the “On” position, but do not start the car. This may help reset the sensor.
It’s important to note that the specific method for resetting the tire pressure sensor may vary depending on the model year of your Acura ILX. Some models may have a reset button on the dashboard or require the use of a magnet or scanning tool [[10]]. Consult your owner’s manual or contact a dealer for the exact procedure for your specific model year.
If you’re unsure about the process or have any concerns, it’s recommended to schedule a tire maintenance appointment at an authorized Acura service center for assistance.
Please let me know if there’s anything else I can help you with!
Contents
- Can I reset my tire sensors myself?
- Where is the TPMS reset button?
- Where is the TPMS sensor button located?
- How do you reset the TPMS system error on a Acura?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is the TPMS reset button on Acura ILX?
- Do all cars have a TPMS reset button?
- Why is my tire pressure light on but my tires are fine?
- How do you manually reset TPMS?
- How do I clear my TPMS check?
Can I reset my tire sensors myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it. Release the TPMS reset button after three seconds.
How do you reset the TPMS system error on a Acura?
(Only for Older Acura Cars With Turn-Key Ignitions): Turn the key to the “On” position, but don’t start the car. Then, hold the TPMS light reset button, wait for the tire pressure light to blink three times, and then release it. After you start the car next, wait 20 minutes for the sensor to refresh itself.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Additionally, you can also utilize the TPMS reset button located under your steering wheel.
It is worth pointing out that not all vehicles have a TPMS reset button, and the system may automatically reset itself once the tyre pressure is adjusted correctly. If you’re uncertain if your vehicle has a reset button, refer to the owner’s manual or get help from a local dealership.
Why is my tire pressure light on but my tires are fine?
TPMS malfunction: If the TPMS itself is malfunctioning, the light may come on even if your tire pressure is normal. If you see the tire pressure light and your tires seem properly inflated, it’s a good idea to have the TPMS checked by a mechanic.
How do you manually reset TPMS?
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
How do I clear my TPMS check?
On press the home button on the touch. Screen then touch vehicle settings touch tpms calibration then select calibrate if calibration failed to start appears repeat the previous. Step the calibration.
