How to Reset the Tire Pressure Light on a Toyota Mirai
To reset the tire pressure light on a Toyota Mirai, you can follow these steps:
1. Check tire pressure: First, make sure to check the tire pressure in all of your vehicle’s tires. Use a tire pressure gauge to ensure that each tire is properly inflated to the recommended pressure.
2. Turn on the ignition: Insert the key into the ignition and turn it slightly without starting the car. This will activate the electrical system of the vehicle.
3. Locate the TPMS reset button: Look for the TPMS reset button, which is usually located under the steering wheel or in the glove box. Refer to your vehicle’s owner’s manual for the exact location of the reset button.
4. Press and hold the TPMS reset button: Press and hold the TPMS reset button until the tire pressure light on the dashboard blinks three times. This may take a few seconds.
5. Release the TPMS reset button: After the tire pressure light blinks three times, release the TPMS reset button.
6. Start the car: Start the car and allow it to run for a few minutes. The tire pressure light should turn off within 20 minutes of driving at speeds of around 50 mph.
If the tire pressure light does not turn off after following these steps, there may be an issue with the tire pressure sensors or the TPMS system itself. In such cases, it is recommended to have the vehicle serviced by a Toyota dealership or a qualified mechanic to diagnose and resolve the problem.
Please note that the specific steps to reset the tire pressure light may vary slightly depending on the model year of your Toyota Mirai. It is always best to consult your vehicle’s owner’s manual for the most accurate and up-to-date instructions.
I hope this helps! Let me know if you have any other questions.
Contents
- How do you reset the TPMS on a Toyota 2024?
- How do you manually reset TPMS?
- How do you clear the tire pressure light?
- Can I reset my TPMS myself?
- Where is the TPMS located?
- Where is the Toyota TPMS reset button?
- How do I manually reset my TPMS light?
- Where is the Toyota TPMS button?
- Why won t my tire pressure light go off even though pressure is fine?
- Where is the TPMS reset button?
How do you reset the TPMS on a Toyota 2024?
Hold down the TPMS reset button, usually found under the steering wheel, until the light blinks three times. Release the button. Next, you’ll need to start your vehicle and give it about 20 minutes to run. At this point, the system should reset.
How do you manually reset TPMS?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is typically located under the steering wheel. Refer to your vehicle’s owner’s manual if you’re unable to locate it.
How do you clear the tire pressure light?
Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car. With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it.
Can I reset my TPMS myself?
Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.
Where is the TPMS located?
The tire pressure sensor is typically found within the tire itself, mounted on the wheel assembly. These sensors relay crucial information to the vehicle’s computer, triggering the tire pressure sensor light when a discrepancy is detected.
It is typically located beneath the steering wheel, near the driver’s sidekick panel, or on the dashboard. Once you’ve found the TPMS reset button, press and hold it for approximately three seconds. You may need a pen or a similar tool to reach it.
How do I manually reset my TPMS light?
Drive at or above 50 mph to reset the sensor for 10 minutes. This causes your sensor to reset the next time you turn on your car. With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it.
You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times. Wait for several minutes with the engine running, to allow the system to record each tire’s pressure, then turn the engine off.
Why won t my tire pressure light go off even though pressure is fine?
If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.
Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.
