AHG Auto Service » Make » Ford » How do you reset the tire pressure light on a Ford Maverick?

How do you reset the tire pressure light on a Ford Maverick?

Resetting the Tire Pressure Light on a Ford Maverick
If the tire pressure light is illuminated on your Ford Maverick, you may need to reset it. Here’s how you can do it:
Manual Reset:
To manually reset the low tire pressure alert on the Ford Maverick, you can erase the diagnostic trouble code from the truck’s computer. This involves disconnecting the main 12-volt battery, which interrupts power to the Engine Control Unit (ECU). Before proceeding, ensure the ignition is switched off and always start by disconnecting the negative battery terminal first. Make sure all electrical equipment such as the lights and radio are shut off.
Check Tire Pressure:
If the TPMS light ignites on your dashboard, check the tire pressure in each tire and inflate them as necessary to the recommended PSI. This figure is located inside the driver’s side door or in your owner’s manual. If reinflation doesn’t work, try out these actions.
Reinflate Tires:
Reinflate all the tires of your Maverick to the manufacturer-specified air pressure, which is mentioned on the vehicle placard or tire inflation pressure label usually located on the B-pillar or the edge of the driver door. If you can’t find the label, check the size of your tire, which is mentioned on the sidewall of the tire, and match it to the tire pressure information shown.
By following these steps, you should be able to reset the tire pressure light on your Ford Maverick.

Why is my tire pressure light still on after filling tires?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

Why won t the low tire pressure light reset?

If the light remains on after adjusting the tire to the proper PSI, you may need to repair your tire, have your TPMS inspected, or try one of the following: Go for a 10-minute drive. Get up to 50 MPH, if possible. Your vehicle may be equipped with a TPMS reset button or reset procedure in your vehicle control center.

How do you get the tire pressure light to go off?

Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle’s owner’s manual for more details or go to owners.honda.com for a downloadable version.

How do you reset the low tire pressure light on a Ford?

And this procedure. Works just fine for that car as it does this car. So this is an automatic ford escape 2013 push button start.

Does Ford Maverick have TPMS?

Yes the sensor is attached to the wheel not the tire. As long as you don’t replace the wheels you’re fine. If you do replace the wheels the sensors can be moved or installed on the new wheels and calibrated to the system. This is pretty standard for all TPMS systems.

Why won t my tire pressure light go off even though pressure is fine?

The causes can be a malfunction, or the weather changes. Other reasons why your TPMS light may still be blinking is because your tire may be damaged, or you might have gotten a recent tire replacement. Overall, the reasons can be vast, which is why it is best to take your car to a technician for professional diagnosis.

How do you reset the tire pressure sensor on a Ford Maverick?

Locate the TPMS reset button (usually beneath or near the steering wheel), and hold it until the light on the dashboard blinks three times. Release the button, start the ignition, and the light should be off. Add air to all tires (including the spare tire) to 3 PSI over the recommended amount.

Where is the TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Why is my tire light on but tires are fine?

TPMS malfunction: If the TPMS itself is malfunctioning, the light may come on even if your tire pressure is normal. If you see the tire pressure light and your tires seem properly inflated, it’s a good idea to have the TPMS checked by a mechanic.

Can you clear a low tire pressure light?

You should only attempt to reset the light after first addressing the tire pressure in every tire. Once your tires are at the appropriate pressure, the light may go off on its own. If it doesn’t go off right away, driving at 50 mph for about 10 minutes should help the tire pressure sensor reset.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment