How do you reset the tailgate on a Subaru Outback?

How to Reset the Tailgate on a Subaru Outback
If you are experiencing issues with the tailgate on your Subaru Outback, there are several methods to reset it based on the experiences of other Subaru owners.
Method 1: Disconnecting the Battery
– One method that has been successful for some Subaru Outback owners is disconnecting the negative lead on the battery for about a minute. This has resolved issues with the tailgate not functioning properly, and it may be worth trying if other methods have not been successful.
Method 2: Holding the Button Under the Handle
– Another method involves holding the button under the handle for about 10 seconds until it beeps. This has been reported to work after the hatch was frozen up by freezing rain and wet snow.
Method 3: Holding Down Buttons on the Rear Liftgate
– Some users have reported success by turning on the car and holding down the buttons on the outside of the rear liftgate that are under the Subaru logo. This action should result in a couple of beeps and reset the power liftgate.
Method 4: Holding the Rear Liftgate Close Button
– To manually reset the tailgate, you can try pressing and holding the rear liftgate close button until you hear it beep at least four times. You can hold this button until it beeps again and then close the liftgate of your car.
It’s important to note that these methods are based on the experiences of other Subaru Outback owners and may not work in all situations. If you are unable to resolve the issue using these methods, it may be advisable to consult a professional mechanic or the Subaru dealership for further assistance.
Remember, always exercise caution when performing any maintenance or troubleshooting on your vehicle.
I hope one of these methods helps resolve the issue with your Subaru Outback’s tailgate!

How do I know if my liftgate actuator is bad?

Symptoms of a bad trunk lock actuator include the trunk refusing to lock or close, the automatic trunk pull-down not working, and the trunk not opening with the key fob but opening with the traditional key.

How do you reset the liftgate on a 2015 Subaru Outback?

Pull all the way up. And all the way back down to reset the limit switches. Okay that’s it.

How do you manually open the rear gate on a Subaru Outback?

Open you can also press the lock button on the rear gate to simultaneously. Close the rear gate and lock your subaru. To open the gate hands-free.

How do you reset the hatch height on a Subaru Outback?

Then what you do you press and hold this button the close button. And you get that beeping and those lights flashing now it’ll only open to that height. And we’ll just do that from the key fob. Here.

How do you reset the trunk height on a Subaru?

Then press the memory button to the left of the steering. Column. Make sure power rear gate memory is set to off the button should be popped.

How do you reset the lift gate on a Subaru Outback?

To reset the electronic rear latch mechanism, close the gate, press and hold the exterior latch button for 10 seconds. You will feel it re-locking the latch. At this point, the gate will open, close, and lock normally.

How do you program a Subaru lift gate?

Then press the memory button to the left of the steering. Column. Make sure power rear gate memory is set to off the button should be popped.

Why is my liftgate not working?

The most common liftgate issues can be traced back to the motor or motor start solenoid. If you hear a clicking noise when the switch is activated, more than likely you have a bad solenoid. Using a small jumper cable, bypass the solenoid by putting direct power to the motor to see if it will run.

Is it bad to manually open a power liftgate?

The only drawbacks are that they are a more expensive option than a manual liftgate and are more expensive to fix if something breaks. For that reason, a lot of people ask, “Can I manually open and close my power liftgate?” The simple answer is yes.

Why won t my Subaru outback tailgate open?

You will want to open and close all doors and the hatch. Lock and unlock the vehicle and try it again. If it is still an issue then try a reset of the liftgate module. You can do this by disconnecting the battery (both positive and negative terminals).