To reset the oil light on a Ford Transit Custom, you can follow these steps:
1. Turn the ignition key to the ON position, but do not start the engine. If your vehicle has an ignition start button, press it once without applying pressure to the brake.
– Source:
2. While the ignition is on, press and hold both the brake and gas pedals simultaneously until you see a message on the dash display that reads “service: oil reset in prog.”
– Source:
3. Continue to hold the pedals for about 20-25 seconds until a new message appears that says “service: full oil reset.”
– Source:
4. Release the brake and gas pedals.
– Source:
5. Turn off the ignition.
– Source:
6. Start the engine to confirm that the oil light has turned off.
– Source:
Please note that these steps may vary slightly depending on the model year of your Ford Transit Custom. It’s always a good idea to consult your vehicle’s owner’s manual for specific instructions.
Contents
- How do you reset the oil life on a Ford Transit Custom?
- How do you reset the oil life on a Ford?
- How do you reset the engine management light on a Ford Transit?
- How do you reset the oil light on a 2017 Ford Transit van?
- How do I reset my oil life display?
- How do you reset the service light on a 2015 Ford Transit Custom?
- How do you reset a Ford Transit after service?
- How do I reset my Ford engine service?
- How do you reset the oil change light on a 2016 Ford Transit van?
- How do you reset the warning lights on a Ford Transit Custom?
How do you reset the oil life on a Ford Transit Custom?
Fully press the accelerator and brake pedals at the same time. Keep the accelerator and brake pedals fully pressed. After three seconds, a message appears confirming that the reset is in progress. After 25 seconds, a message appears confirming that the reset is complete.
How do you reset the oil life on a Ford?
And then when you’re told go ahead and hold that reset button down. And now our oil life is set to 100. So there you go.
How do you reset the engine management light on a Ford Transit?
And then we will turn the ignition back onto the second slot. And we will hold our pedals down for around 30 to 40 seconds. Now some transits.
How do you reset the oil light on a 2017 Ford Transit van?
You’re going to hold this for about 25. Seconds. After 25 seconds the message should change to oil reset. Complete at this point you can remove your feet from both the brake and accelerator. Pedal.
How do I reset my oil life display?
Button located on the steering wheel. Select info scroll down until you can select remaining oil life on the menu. Press and hold the center of the thumbnail. Until it says your oil light is 100.
How do you reset the service light on a 2015 Ford Transit Custom?
And then it’ll show right there service oil reset complete and then you can lift your feet off the pedals. Turn the ignition.
How do you reset a Ford Transit after service?
Usually takes about 20 seconds something that is keeping plaster for presses engine service now. And don’t think it will just start flashing. You just have to be patient. Still holding them pressing.
How do I reset my Ford engine service?
Down. Once it says all reset. Complete you turn the ignition off come off the pedals that’s it.
How do you reset the oil change light on a 2016 Ford Transit van?
And then it’ll show right there service oil reset complete and then you can lift your feet off the pedals. Turn the ignition.
How do you reset the warning lights on a Ford Transit Custom?
Just turn your ignition. On on second position so you get all the lights on the dash. And then press a hold at the same. Time. Break an accelerator.
