How do you reset the oil life on a Ford Transit?

To reset the oil life on a Ford Transit, you can follow these steps:
1. Turn the ignition key to the ON position, but do not start the engine. If your Ford Transit has an ignition start button, press it once without applying pressure to the brake.
2. While the ignition is on, press and hold both the brake and gas pedals simultaneously.
3. Continue holding the pedals until you see a message on the dash display that reads “Service: Oil Reset in Prog” or a similar message indicating that the oil reset process is complete.
4. Once you see the message, release the pedals.
5. Turn off the ignition.
6. Finally, start the engine to confirm that the oil change light has been reset and remains off.
Please note that these steps may vary slightly depending on the model year of your Ford Transit. If you encounter any difficulties or have further questions, it is recommended to consult your vehicle’s owner’s manual or contact a Ford dealership for assistance.
I hope this helps! Let me know if you have any other questions.

How do you reset the oil change light on a 2016 Ford Transit?

And you’re going to press the accelerator pedal and the brake pedal immediately. And just continue to hold them down so key on pedals.

How do I reset my oil life manually?

Turn the ignition off. The oil change light should disappear. If the light is still on, try holding both the brake and accelerator pedals while the key is in the on position. Another method is to press and hold the stem (if your vehicle has one) for 10 seconds or until the icon begins flashing.

How do I reset my oil life to 100%?

Once it starts to Blink you’ve released a button for a moment. And then you press it and you hold it back in again. And it’ll reset to 100 and it’ll stop blinking that’s it reset.

How do you reset a Ford Transit after service?

Usually takes about 20 seconds something that is keeping plaster for presses engine service now. And don’t think it will just start flashing. You just have to be patient. Still holding them pressing.

How do you reset the oil life on a 2018 Ford Transit Connect?

The all change required comes up usually takes around 20 seconds. Or is it completed. So when you turn it off zero messages there you go.

How do you reset the oil life after an oil change?

To reset your oil light, simply pump your gas pedal down to the floor 3 times, pausing briefly between each pump. Depending on your car’s model and year, you might see a message on your dash telling you the light is reset.

How do you reset the oil life on a Ford?

STEPS FOR FORD MODELS (WITH MESSAGE CENTER)
Use the up and down buttons to scroll to “Settings” in your information display. From the “Settings” menu select “Vehicle” and then “Oil Life Reset.” Press down the “OK” button on your steering wheel. Hold down “OK” to completely reset your oil change light.

How do you reset the oil life on a 2015 Ford Transit Connect?

And then it’ll show right there service oil reset complete and then you can lift your feet off the pedals. Turn the ignition. Off.

How do you reset the oil light on a 2016 Ford Transit?

And you’re going to press the accelerator pedal and the brake pedal immediately. And just continue to hold them down so key on pedals.

How do you reset the oil light on a Ford Transit van?

Fully press the accelerator and brake pedals at the same time. Keep the accelerator and brake pedals fully pressed. After three seconds, a message appears confirming that the reset is in progress. After 25 seconds, a message appears confirming that the reset is complete.