How do you reset the oil life on a 2015 Lexus NX 200t?

Resetting Oil Life on a 2015 Lexus NX 200t
To reset the oil life on a 2015 Lexus NX 200t, you can follow these steps:
Step 1: Close all doors and set the gear to the park position.
Step 2: Stop the car and turn the ignition switch to the ON position (press the power button 2x) without touching the brake pedal. If the service maintenance has not been reset while the ignition is turned on, try to start the engine.
Step 3: Press the BACK button, then scroll to the right to navigate SETTINGS.
Step 4: Scroll down to SCHEDULE MAINTENANCE, then press the OK button. Reset the OIL MAINTENANCE when the oil change is done.
Step 5: Select YES, then press the OK button.
Step 6: The data has been reset. Turn off the ignition, and the oil service maintenance required reset is complete.
If the above procedure does not work, you can also try the following steps:
– Start the engine/hybrid system.
– Press the box icon.
– Scroll through the menu using the left and right arrows until you find the gear icon and select it by pressing the circle button in the middle of the arrows.
– Use the up and down arrows to select “SCHEDULED MAINTENANCE” by pressing the circle button.
– Select “YES” and then press the circle button.
– “THE DATA HAS BEEN RESET” will be displayed.
– Turn the ignition off.
These steps should help you reset the oil life monitor on your 2015 Lexus NX 200t.

How do I reset the maintenance required light in my Lexus?

How to Reset Lexus Maintenance Light

1. Turn on your engine.
2. Flip your Odometer/Trip Display to ODO mode or TRIP A mode, depending on the model.
3. Turn the ignition switch off.
4. Hold the Trip Meter Reset button while turning the ignition switch back on.
5. Wait for the maintenance light to blink, turn solid, and then turn off.

How do I reset my oil life manually?

First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.

How do I reset my oil life to 100%?

Press the button until you reach “Oil Life.” Push and hold the button until you’ve changed the percentage to 100. Press the button again, hold it, and cycle back to “Oil Life.” Hold the button until you see “Oil Change Required” then hold again when you see “Hold Reset.” After you hold, the reset should stick!

How do I clear the maintenance required light?

Quick and Easy Steps to Reset the Maintenance Required Light

1. 1 Turn your car on, but do not start the engine.
2. 2 Change the dashboard display to “TRIP A.”
3. 3 Switch your car off and hold the “ODO/TRIP” button down.
4. 4 Start your car, but don’t turn on the engine.
5. 5 Hold the “ODO/TRIP” button down for 10 seconds.

How do I reset my oil life display?

Button located on the steering wheel. Select info scroll down until you can select remaining oil life on the menu. Press and hold the center of the thumbnail. Until it says your oil light is 100.

How do you turn off the maintenance required light on a Lexus NX?

We did both so we’re going to go ahead and reset both of them. See reset complete on the no you’ve done it correctly. Thanks for watching like comment and subscribe.

How do you reset the oil light on a Lexus?

And you’re done. In the newer generation of Lexus ES. You can reset the maintenance light for the instrument cluster. And navigation display.

How do I turn off the maintenance message on my Lexus?

It doesn’t say trip a or trip B. But it needs to say Odo frodometer. Once you do that turn the key to the off position press. And hold down the odometer trip button over here on the side.

How do you reset the oil life on a 2017 Lexus nx200t?

And you’re going to select yes press enter here. And it will the data has been reset.

How do you reset the maintenance light on a 2015 Lexus nx200t?

And you hit the inner button. Here yes scheduled maintenance that data has been reset. And I’m Bryan doesn’t from how to automotive.