AHG Auto Service » Make » Chevrolet » How do you reset the oil life on a 2014 Chevy Sonic?

How do you reset the oil life on a 2014 Chevy Sonic?

Resetting Oil Life on a 2014 Chevy Sonic
To reset the oil life on a 2014 Chevy Sonic, you can follow these steps:
1. Access Oil Life Menu: Start by turning the ignition on without starting the engine. Then, press the MENU button until the remaining oil life is displayed.
2. Reset Oil Life: While the remaining oil life is displayed, press and hold the SET/CLR button until the oil life is reset to 100%.
3. Verification: Turn the ignition off and then start the engine to verify that the indicator has been reset.
It’s important to note that these steps are specific to the first generation of the Chevrolet Sonic (2012-2016 model years) and should work for the 2014 model as well.
Remember to be cautious and ensure that the oil life display is reset only after the oil has been changed, as resetting it accidentally at any other time may lead to inaccurate readings.
By following these steps, you should be able to successfully reset the oil life on your 2014 Chevy Sonic.

How do you reset the oil life on a 2014 Chevy?

We’ve got a nice. Clean. Oil change here in the 2014. So it’s probably good to close for a year I almost. I really only have to change this every.

How do you check the oil on a 2014 Chevy Sonic?

It looks like this pull it out and wipe it clean with a paper towel. Doing this will help give you an accurate. Reading now insert the dipstick back into its tube.

How do you reset the oil life after an oil change?

To reset your oil light, simply pump your gas pedal down to the floor 3 times, pausing briefly between each pump. Depending on your car’s model and year, you might see a message on your dash telling you the light is reset.

How do you check the oil level after an oil change?

6 Steps For Checking Your Oil

  1. Park On Level Ground. To begin with, park your car on level ground.
  2. Find And Remove The Dipstick. Now, pop opens your hood and look for the oil dipstick.
  3. Wipe And Reinsert The Dipstick. Using your shop towel or rag, wipe the oil off the dipstick.
  4. Take Your Reading.
  5. Follow Up If Necessary.

How do I reset my oil life manually?

First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.

How do you reset the change oil light on a Chevy?

Light. So to reset the oil light we’re going to turn the key. On we’re going to press the gas pedal down slowly the wide open throttle.

How do I reset my Chevrolet Sonic?

Okay so today we’re in a Chevy Sonic. And we’re going to be resetting the oil light. And it’s pretty simple on this one we’re going to utilize the menu.

How do you reset the oil life on a 2012 Sonic?

Push this button until you see you can cycle it until you see the little percentage in the oil sign. And push this button. And hold it until you see the 100. And now you’re all done the end.

How much oil does a 2014 Chevy Sonic need?

4.2 quarts
Capacity: With filter 4.2 quarts. After refill check oil level.

How do I reset my oil life display?

Button located on the steering wheel. Select info scroll down until you can select remaining oil life on the menu. Press and hold the center of the thumbnail. Until it says your oil light is 100.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment