How do you reset the maintenance light on a 2016 Lexus NX 200t?

To reset the maintenance light on a 2016 Lexus NX 200t, you can follow these steps:
1. Close all doors and put the gear in the park position.
2. Start the car and turn the ignition switch to the ON position without touching the brake pedal. If the service maintenance has not been reset while the ignition is turned on, try starting the engine.
3. Press the BACK button on the steering wheel and scroll to the right to navigate to SETTINGS.
4. Scroll down to SCHEDULE MAINTENANCE and press the OK button.
5. Select YES and press the OK button to reset the oil maintenance.
6. Turn off the ignition, and the oil service maintenance required light should be reset.
Please note that these instructions are specifically for the 2016 Lexus NX 200t. If you have a different model or year, the steps may vary.

How do you reset your oil maintenance light?

First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.

How do I turn off the maintenance message on my Lexus?

It doesn’t say trip a or trip B. But it needs to say Odo frodometer. Once you do that turn the key to the off position press. And hold down the odometer trip button over here on the side.

How do I clear the maintenance required light?

Quick and Easy Steps to Reset the Maintenance Required Light

1. 1 Turn your car on, but do not start the engine.
2. 2 Change the dashboard display to “TRIP A.”
3. 3 Switch your car off and hold the “ODO/TRIP” button down.
4. 4 Start your car, but don’t turn on the engine.
5. 5 Hold the “ODO/TRIP” button down for 10 seconds.

How do you reset the maintenance required light on a 2016 Lexus?

And under vehicle settings the first one is scheduled maintenance. And get rid of that scheduled maintenance reset data let’s click yes. Data has been reset.

How do I reset my service maintenance?

So put your key in the ignition. And turn it to the run position. You can see here we have the trip mileage up. So hit the odometer button and switch that to total mileage. Okay.

Where do I reset my oil change light?

Step-by-Step Guide: How to Reset Your Oil Change Light
Find the reset button, usually located on the dashboard or the steering wheel. Depending on your car model, this might be a bit of a hunt. Press and hold the reset button. You may need to hold for a few seconds, but be patient.

How do you reset the maintenance light on a Lexus NX?

We did both so we’re going to go ahead and reset both of them. See reset complete on the no you’ve done it correctly.

How do you reset the oil light on a Lexus IS 200?

Lexus IS: How to Reset Your Oil Light

1. Step 1 – Turn the car on and set the odometer to lifetime miles.
2. Step 2 – Turn the car off.
3. Step 3 – Press and hold the odometer button as you press the start button twice.

How do you reset the maintenance required light on a Lexus NX 200t?

How to Reset the Lexus Maintenance Light

1. Start your vehicle.
2. Switch your Odometer/Trip Display to ODO mode or TRIP A mode.
3. Turn the ignition switch to the off position.
4. Press and hold the Trip Meter Reset button as you turn the ignition switch back to the on position.

How do I reset my maintenance soon light?

The icons look a little bit different. But then you’re gonna slide over here to the one with the gear above. The car like that push and hold scheduled maintenance push ok to reset.