How do you reset the maintenance light on a 2016 Lexus GX 460?

How to Reset the Maintenance Light on a 2016 Lexus GX 460
To reset the maintenance light on a 2016 Lexus GX 460, you can follow these steps:
1. Start your vehicle.
2. Switch your Odometer/Trip Display to ODO mode or TRIP A mode.
3. Turn the ignition switch to the off position.
4. Press and hold the Trip Meter Reset button as you turn the ignition switch back to the on position.
5. Wait for the maintenance light to blink, turn solid, and then turn off.
6. Release the Trip Meter Reset button.
These instructions should help you reset the maintenance light on your 2016 Lexus GX 460.
Please note that these instructions are specific to the 2016 model year. If you have a different model year, it’s recommended to consult your vehicle’s owner’s manual for the correct procedure.
I hope this helps! Let me know if you have any other questions.

How do you reset the maintenance required light on a Lexus GX 470?

Fast. So hold it down do not let it go. And put the key on accessory. Watch this see that it’s flashing. It should turn off after a few flashes.

What happens if you don’t reset maintenance light?

Ignoring this light may seem harmless, but doing so could lead to gradual engine wear, reduced performance and even severe engine damage over time.

How do I reset the maintenance required light in my Lexus?

How to Reset Lexus Maintenance Light

1. Turn on your engine.
2. Flip your Odometer/Trip Display to ODO mode or TRIP A mode, depending on the model.
3. Turn the ignition switch off.
4. Hold the Trip Meter Reset button while turning the ignition switch back on.
5. Wait for the maintenance light to blink, turn solid, and then turn off.

How do you reset the oil change service maintenance indicator?

First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.

Why is my maintenance required light on after oil change?

Manufacturers program this warning light to come up automatically every 5,000 miles (8,000 km) or after the last oil change. When your car gets serviced, a mechanic will reset this light so it doesn’t bother you anymore. In most cars, the maintenance light flashes for 5 seconds when you start the engine and then stops.

How do I reset my service maintenance light?

Quick and Easy Steps to Reset the Maintenance Required Light

1. 1 Turn your car on, but do not start the engine.
2. 2 Change the dashboard display to “TRIP A.”
3. 3 Switch your car off and hold the “ODO/TRIP” button down.
4. 4 Start your car, but don’t turn on the engine.
5. 5 Hold the “ODO/TRIP” button down for 10 seconds.

How do you reset the maintenance light on a 2016 Lexus?

And under vehicle settings the first one is scheduled maintenance. And get rid of that scheduled maintenance reset data let’s click yes. Data has been reset.

What is the maintenance required light on a Lexus GX 460?

When the Lexus Maintenance Required light appears on your dashboard, it means that your vehicle is due for an oil change, tire rotation, or other routine maintenance task. This usually occurs every 3,500 to 5,000 miles, depending on your Lexus model.

Why does my Lexus say maintenance required soon?

Your Lexus Maintenance Required light means it’s time to bring your vehicle in for its recommended 5,000-mile service. This maintenance visit will include the following: Engine oil change. Filter change.

How do you reset the maintenance light on a 2016 Lexus gx460?

So without pressing the brake I’ll press this one two. And now taking a look at the dash you can see it’s resetting. Once the reset is complete then we can release that button. And it’s been reset.