How to Reset the Maintenance Light on a 2012 Toyota RAV4
To reset the maintenance light on a 2012 Toyota RAV4, you can follow these steps:
1. Turn the Ignition On: Make sure the odometer is displayed, then turn the ignition off.
2. Press and Hold the Reset Button: While holding down the reset button, turn the ignition back on.
3. Wait for the Display: The display should show dashes and count down until zeroes are displayed.
4. Release the Reset Button: Once the zeroes are displayed, release the reset button.
5. Start the Car: Start the car, and the maintenance light should be turned off.
If the light remains on, you can repeat this process one or two more times to ensure the maintenance light is successfully reset.
It’s important to note that if the maintenance light remains on even after having maintenance done, it’s recommended to bring the vehicle in for service, as the light can signal a potentially serious problem.
Contents
- How to turn off maintenance light on Toyota RAV4 push button start?
- How do you reset the maintenance light on a RAV4 push button start?
- How do I clear the maintenance required light?
- What does oil maintenance required now mean on Toyota RAV4?
- What is the maintenance schedule for a 2012 RAV4?
- How do you turn off the maintenance required light on a 2012 Toyota?
- How do you clear the maintenance message on a Toyota?
- How do I turn off the maintenance reminder on my Toyota?
- How do you turn off the maintenance required light on a Toyota RAV4?
- What is the maintenance required light on the Toyota RAV4 dashboard?
Push and hold the trip meter reset button on the dashboard. Turn your key to position two. Hold the odometer button for ten seconds. Your RAV4’s light should flash, perhaps beep, and then go out.
Reset the Maintenance Light on a Toyota RAV4
- Place your key in the ignition and turn to position one.
- Push and hold the odometer button on the dashboard.
- Continue to press and hold, while turning the key to position two.
- Keep holding the odometer button for 10 seconds, until the light starts flashing.
How do I clear the maintenance required light?
Quick and Easy Steps to Reset the Maintenance Required Light
- 1 Turn your car on, but do not start the engine.
- 2 Change the dashboard display to “TRIP A.”
- 3 Switch your car off and hold the “ODO/TRIP” button down.
- 4 Start your car, but don’t turn on the engine.
- 5 Hold the “ODO/TRIP” button down for 10 seconds.
What does oil maintenance required now mean on Toyota RAV4?
Toyota “MAINT REQD” Meaning
The light remains active to let you know it’s time for an oil change. It’s a good idea to stick to your routine maintenance schedule, which includes oil changes, as it improves your fuel efficiency and keeps your vehicle running smoothly.
What is the maintenance schedule for a 2012 RAV4?
The Toyota RAV4 maintenance schedule follows a 6-month/5,000-mile interval. This means you should be getting routine maintenance at least twice a year—with more frequent appointments if you drive more than 10,000 miles each year. Make sure to follow whichever interval comes first.
How do you turn off the maintenance required light on a 2012 Toyota?
And make sure your foot is off the brake pedal. Then you put you have to push it twice. So then you’ll see it blinking backwards like that. And once it gets to zero. And though all the lights flash.
How do you clear the maintenance message on a Toyota?
Data if you do hit yes I’m not going to reset it. But then I’m going to show you in a couple of other vehicles there’s just a minor minor. Difference okay this one is a Twitter Camry.
How do I turn off the maintenance reminder on my Toyota?
Put your key in the ignition and turn it to position one, the position just before starting the car. Push and hold the trip meter reset button on the dashboard, then turn your key to position two. Continue holding the odometer button for 10 seconds. The light should then flash, possibly beep, and then go out.
How do you turn off the maintenance required light on a Toyota RAV4?
Press. It once the car is off we’re going to turn it to its accessory phase. So for the push to start cars push it twice. And for the keys you push it right before the car starts. On.
What is the maintenance required light on the Toyota RAV4 dashboard?
Unlike the “check engine” light, the Toyota Maintenance Required light in the gauge cluster—which reads “MAINT REQD”—means that it has been 5,000 miles since the last reset. This indicates that your Toyota is due for scheduled maintenance, such as an oil change.