How to Reset the Maintenance Light on a 2011 Lexus RX 350
To reset the maintenance light on a 2011 Lexus RX 350, you can follow these steps:
1. Start your vehicle and make sure the odometer is displaying the total mileage, not the trip meter.
2. Turn the ignition off.
3. Press and hold the ODO/TRIP button.
4. While holding the ODO/TRIP button, turn the ignition to the run position (push the START/STOP button once).
5. Continue holding the ODO/TRIP button for about 5 seconds until the maintenance light turns off.
6. Release the ODO/TRIP button.
After following these steps, the maintenance light should be reset.
Please note that these instructions are specifically for the 2011 Lexus RX 350 model. If you have a different model year or a different Lexus vehicle, the reset procedure may vary.
Contents
- How do you reset the oil change service maintenance indicator?
- How many miles will a Lexus RX 350 last?
- Why is my Lexus RX350 showing maintenance required?
- How to turn off the maintenance required light on a Lexus RX 350?
- How do I turn off maintenance required soon?
- How do you reset the oil maintenance light on a 2011 Lexus RX 350?
- How do I reset my oil light after maintenance?
- How do I clear the maintenance required light?
- What is the maintenance schedule for a 2011 Lexus rx350?
- How do you reset the maintenance light on a 2011 Lexus IS 250?
How do you reset the oil change service maintenance indicator?
First, turn your key to the “On” position (which is two turns of the key). Make sure to not start the engine. Completely press down the gas pedal three times within ten seconds, then turn off your vehicle. Start up the vehicle to check that your oil light has reset.
How many miles will a Lexus RX 350 last?
The average vehicle can register around 150,000 miles on the odometer. When it comes to the Lexus RX 350, how long does it last? When properly cared for and driven, the Lexus RX can last for 250,000 miles or more.
Why is my Lexus RX350 showing maintenance required?
When the Lexus Maintenance Required light appears on your dashboard, it means that your vehicle is due for an oil change, tire rotation, or other routine maintenance task. This usually occurs every 3,500 to 5,000 miles, depending on your Lexus model. Find out more about Lexus maintenance with Rallye Lexus!
How to turn off the maintenance required light on a Lexus RX 350?
It doesn’t say trip a or trip B. But it needs to say Odo frodometer. Once you do that turn the key to the off position press. And hold down the odometer trip button over here on the side.
How do I turn off maintenance required soon?
Almost everything has been really really simple and it’s accessible through what is called the multi-information display. Or this thing. So it’s really easy you need to get to the settings.
How do you reset the oil maintenance light on a 2011 Lexus RX 350?
Step five continue to hold down the trip button. And you’ll see the blinking backward light then change to zero and you’re done.
How do I reset my oil light after maintenance?
So we’re gonna press the accelerator pedal three times once twice three times right there and then we’re gonna turn the key. Off. Let’s turn the key back on.
How do I clear the maintenance required light?
Quick and Easy Steps to Reset the Maintenance Required Light
- 1 Turn your car on, but do not start the engine.
- 2 Change the dashboard display to “TRIP A.”
- 3 Switch your car off and hold the “ODO/TRIP” button down.
- 4 Start your car, but don’t turn on the engine.
- 5 Hold the “ODO/TRIP” button down for 10 seconds.
What is the maintenance schedule for a 2011 Lexus rx350?
Maintenance Every 6 Months / 5,000 Miles
- Set Lexus Personalized Settings if needed.
- Rotate tires for even wear.
- Check the driver floor mat installation.
- Adjust fluid levels as required.
- Inspect wiper blades.
- Examine brakes thoroughly.
- Test drive the vehicle comprehensively.
- Reset the Maintenance Reminder.
How do you reset the maintenance light on a 2011 Lexus IS 250?
To reset oil maintenance required message first make sure your odometer is set to display the letters o. Do. Next turn off your vehicle.