How do you reset the liftgate on a 2017 Toyota Highlander?

Resetting the Liftgate on a 2017 Toyota Highlander
To reset the liftgate on a 2017 Toyota Highlander, you can follow the steps below:
1. Open the Liftgate: Begin by opening the back door of the Highlander.
– Source: ,
2. Press and Hold the Liftgate Button: Once the liftgate is open, press and hold the rear liftgate close button until it beeps four times, pauses, and then beeps two more times.
– Source: , , [[3]],,,
3. Close and Open the Liftgate: After the beeps, close the liftgate and then open it again to complete the reset process.
– Source:
It’s important to note that these steps are specific to the 2017 Toyota Highlander model and may vary for different vehicle models.
If you encounter any issues with the power liftgate, such as it not opening or closing properly, following these reset steps may help resolve the problem before seeking professional assistance.

Can you turn off start stop technology Toyota?

To turn off this feature, locate the encircled “A” button to the left of the steering wheel. Pressing it again will reactivate the system or restart the engine if it is currently stopped. Keep in mind that turning the car off and then on will reset the Stop and Start feature back on.

Why is my automatic liftgate not working?

A lift strut issue, a malfunctioning power hatch, and a bad switch or button are some of the common reasons why a power liftgate may malfunction. The buttons, fuses, and electrical connectors must be inspected to diagnose a power liftgate issue.

How do you set the PBD on a Toyota?

Using the steering wheel-mounted controls, go to the Settings menu. Scroll to the PBD (or Power Back Door) icon and select it. Select System Settings and use the center button to choose All Off or All On. Press the back arrow to save your setting.

How do I factory reset my Toyota Highlander?

That’s what we want isn’t it you hit that it actually connects using the DCM. The data control module sends everything up. And says all right now it’s reset.

How do you reset the liftgate on a 2017 Highlander?

Hold the button until you hear those four beeps continue holding for another five seconds. Until you hear two more beeps. It is now back to your factory settings foreign.

How do you reset a Toyota Power Liftgate?

With the liftgate open and not moving, press and hold the rear liftgate close-button until it beeps 4 times (button is located on the door jamb of the rear liftgate, and only accessible when the liftgate is open). Continue to hold until it beeps again, and then let go.

How do I know if my liftgate solenoid is bad?

The most common liftgate issues can be traced back to the motor or motor start solenoid. If you hear a clicking noise when the switch is activated, more than likely you have a bad solenoid. Using a small jumper cable, bypass the solenoid by putting direct power to the motor to see if it will run.

How do I reset my 2017 Toyota Highlander?

Button until you get to trip. A once you’re at trip a turn the car off to reset the maintenance slight hold down the odometer. Button. And at the same time press the push to start button two.

How do I know if my liftgate actuator is bad?

Symptoms of a bad trunk lock actuator include the trunk refusing to lock or close, the automatic trunk pull-down not working, and the trunk not opening with the key fob but opening with the traditional key.

How do I reset my Toyota Highlander?

Step 5. Use the down button to scroll down and select scheduled maintenance or oil maintenance. Step six when a confirmation message appears select yes and then press the OK. Button.