How do you reset the BCM on a Ford Ranger?

How to Reset the BCM on a Ford Ranger
The Body Control Module (BCM) in a Ford Ranger controls all the non-engine related functions and features, including lights, displays, and SRS/Airbag systems. Here’s how you can reset the BCM on a Ford Ranger:
Reset Procedure:
Depending on the year of your Ranger, you may be able to reset the BCM by disconnecting the negative battery terminal and leaving the truck to sit for 10-15 minutes. For newer models, it’s likely that you will need to take the truck into a Ford service center because it will need to be reset using their proprietary software.
If you have a Ford Ranger with one or both headlights not working and you have checked the bulbs, wiring, etc., and the fault cannot be found, you can check your BCM for fault codes. Usually, you will have U1000 or U3000 (Solid state driver protection activated). In such cases, you can send the module for resetting, which can restore the function of the BCM to its original working state at a fraction of the cost of a new unit.
For simpler but effective home-based approach, you can use the Ford Ranger’s battery to clear up your PCM. Disconnect the negative battery cable and wait at least 15 minutes before re-connecting. Start the car and drive at various RPMs and speeds to relearn the power control module.
It’s important to note that if you have faulty beam lights and need to reset the BCM to solve this problem, the car also being a Ford Ranger, you can reset the BCM to make it accept the LED bulbs, which should solve the issue.
In summary, the process for resetting the BCM on a Ford Ranger involves disconnecting the negative battery terminal for a certain period, or in some cases, taking the vehicle to a Ford service center for a reset using proprietary software.
I hope this helps! If you have any further questions, feel free to ask.

How do you know if BCM module is bad?

Erratic Electrical Function A faulty body control module can also cause intermittent operation of various electrical functions, such as a vehicle’s horn, lights, and wipers. Wildly sweeping instrument cluster dials are also a tell-tale sign of body control module failure, as is irregular door lock and radio operation.

How do you do a master reset on a Ford?

Doing. So will completely erase all information stored. On your sync 3 and sync connect system back to the factory default settings. Including all of your paired Bluetooth devices.

What is the BCM issue on the Ford Ranger?

The Body Control Module (BCM) detects a fault when the resistance is outside its normal tolerances, this can be caused by an open circuit in the system such as, a faulty globe, broken wire (short to ground) or has aftermarket LED OR HID globes fitted or accessorises such as light bars being fitted to the vehicle …

What causes a BCM to malfunction?

The body control module (BCM) is in charge of managing all your automotive electronic systems. A malfunctioning BCM can prevent certain vehicles from starting, depending on the system design. Common causes of BCM malfunctions include hard impact collisions, loose wiring harnesses, and shorting wires.

How do I manually reset my PCM?

Then, you can reset the PCM by pulling the fuse, which typically involves these steps.

1. Find the fuse for your PCM. If you’re unsure of which fuse to remove, consult the fuse box diagram in the owner’s manual or consult online resources.
2. Remove the fuse from the box.
3. Put it back on after 10 to 20 seconds.

Can you reset a BCM?

The BCM is the central unit of a car just like the CPU in your personal computer. It controls and manages numerous functions inside the engine unit. If the central system is not working properly, a professional will perform a Body Control Module reset to make things perfect again.

How long does it take to reprogram a BCM?

Hi! Hope I can help sorry to hear about your repairs needed the BCM take some time to change and reprogram also like around 2.5 hr. labor fuse links around 1.0 hrs . ignition switch can be around 2.0 hrs and reprogram keys also another hour .

What happens when the BCM goes bad?

When the BCM is failing, you may notice erratic behaviors such as the windshield wipers operating independently of input, or issues with the keyless entry system. These malfunctions not only disrupt the convenience of your driving experience but could compromise safety if left unattended.

What causes BCM failure?

The body control module (BCM) is in charge of managing all your automotive electronic systems. A malfunctioning BCM can prevent certain vehicles from starting, depending on the system design. Common causes of BCM malfunctions include hard impact collisions, loose wiring harnesses, and shorting wires.

How do I reset my Ford body control module?

Just remove both cables from the battery and touch the ends of the cables together to bleed off the voltage stored in the BCM capacitors, which resets the BCM’s memory and erases trash data. The original programming is non-volatile and will always remain.