AHG Auto Service » Make » Dodge » How do you remove the side marker lights on a Dodge Challenger?

How do you remove the side marker lights on a Dodge Challenger?

Removing Side Marker Lights on a Dodge Challenger
To remove the side marker lights on a Dodge Challenger, you can follow these steps:
1. Locate the Metal Tab and Plastic “Hook”: Inside each fender, there is a metal tab on one side of the side marker which needs to be pushed in to release it. The other side of the marker has a plastic “hook” which helps locate it into place.
2. Use a Pry Tool or Flat Head Screwdriver: You can use a plastic pry tool with a flat edge or a flat head screwdriver to pop off the existing side marker assembly. Apply very little prying pressure to the side opposite of the light bulb, and they should come right out .
3. Remove the Stock Bulb and Housing: After popping off the side marker assembly, you can then remove the stock bulb and the stock side marker housing. Make sure to take out the entire bulb socket assembly during the installation process to find the appropriate plug.
4. Install the New Side Marker Lights: If you are replacing the side marker lights with new ones, you can directly plug in the adapter of the new LED side marker lamp. If the LED side marker does not light up, flip the adapter 180 degrees. Then, reinstall the new LED side marker light in the reverse way you removed the stock side marker.
It’s important to be gentle during this process to avoid damaging the plastic lenses or the fiberglass body of the car.
Remember to exercise caution and refer to the specific instructions for your Dodge Challenger model and year.
I hope this helps! If you have any other questions, feel free to ask.

Are clear side marker lights illegal?

Clear marker lights in California are legal, however, to comply with CA the lights in those clear side lights must be amber on the front, red on the rear. No other color is allowed.

Do you have to have side marker lights?

Background. Side marker lamps have been required by FMVSS No. 108 since it was promulgated as one of the initial Federal Motor Vehicles Safety Standards in 1967. The main purpose of side marker lamps is to indicate the overall length of the vehicle.

What is the rarest color Challenger?

There are colors released only for limited-edition Dodge Challenger models like Furious Fuschia and Stinger Yellow. Certain old-school model paint colors, like Sassy Grass and Citron Yella, were discontinued after only one year of production and are incredibly rare as a result.

What are the side marker lights?

Side markers protect you by informing other cars about your vehicle when observed from the side, hence the name “side marker.” Side marker lights are always directed perpendicular to the vehicle.

What do marker lights look like?

Well come on inside you’re in for a treat. In the heavyweight cars you just move the marker and change it. But in the streamliner cars of the 50s. They came up with a neat.

What are the side lights called?

Sidelights, also known as “Parking Lights” serve as an alternative to your dipped beam headlights. Drivers typically turn their sidelights on when it is dark or cloudy and the natural lighting is low but not dark enough to put their dipped beams on.

Where is a side marker light on a car?

Side marker lights located on the body and front and rear can help illuminate the front and rear of the car and even have dynamic turn signal effects.

What are the yellow strips on challengers?

Will owners heed his plea? Dodge ships its Challengers and Chargers with yellow plastic pieces on the splitter to protect the part during shipping. These splitter guards are supposed to be removed by the dealer, but a number of owners have taken to leaving them on, giving their cars an, uh, colorful accent.

How do you remove challenger side marker lights?

Them. Out now once we have. Those out we’re going to be able to take. Our inner wheel well here. And just move it out of our. Way.

Do cars need side marker lights?

Background. Side marker lamps have been required by FMVSS No. 108 since it was promulgated as one of the initial Federal Motor Vehicles Safety Standards in 1967. The main purpose of side marker lamps is to indicate the overall length of the vehicle.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment