How do you remove the rear headrest on a Chevy Equinox?

Removing the Rear Headrest on a Chevy Equinox
To remove the rear headrests of a Chevy Equinox, you can follow these steps:
1. Extend the Headrest to Maximum Height: Pull up on the assembly until it is extended to its maximum height.
2. Locate the Plastic Covers: Locate two plastic covers at the base and on either side of the part’s metal poles. The inside edge of the plastic cover is equipped with a small entry point the size of a pinhole. This opening can be found on both sides of the headrest at the end of the metal poles it is affixed to.
3. Release the Metal Pole: Using the end of a bent paper clip or other small tool, insert it into the hole and press. The metal pole will be released. Repeat this step for the other side of the seat and pull upwards to remove the headrest completely.
It’s important to note that the rear headrests of the Chevy Equinox are not designed to be removed in some models, as Chevrolet redesigned the Equinox for the 2010 model year, and its headrests are not removable.
I hope this helps! If you have any other questions, feel free to ask.

How do you adjust the headrest on a Chevy Equinox?

Move the headrest up and down until the headrests align with the top of your head for vehicles with adjustable back row headrests push the button on the side of the headrest.

How do you remove a Chevy headrest?

Sides. Just like that to put the headrest back in after you’ve installed your seat covers or done whatever you needed to do that needed the headrests off. You just slide it back in till it clips.

What is rear seat headrest?

The rear seat(s) is equipped with headrests in all the seating positions for the occupant’s safety and comfort. The headrest not only provides comfort for passengers, but also helps protect the head and neck in the event of a collision.

How do you remove the headrest on a 2018 Chevy Equinox?

The inside edge of the plastic cover is equipped with a small entry point the size of a pinhole. This opening can be found on both sides of the headrest at the end of the metal poles it is affixed to. Using the end of a bent paper clip or other small tool, insert into the hole and press.

How do you remove the headrest on a 2010 Chevy Equinox?

Removal Procedure
Raise the head restraint to the full up position. Insert a paper clip or a similar tool in the hole at the side edges of the head restraint retainers. Press in on the tool in order to release the retainer clips. Lift the head restraint from the retainers.

How do you remove the headrest on a 2018 Equinox?

As far down as possible. So the headrest does not hit the ceiling. When you pull it out second. Thing pull the headrest all the way up there’s two buttons at the base of the headrest.

How do you remove the backseat headrest?

Press it in. And just pull up on the headrest to release it. And then do the same on the other side stick the paperclip in there press it in. And you can pull the headrest.

How do you adjust the rear headrest on a car?

So that it springs back to its untilled. Addition. Then simply pull the restraint forward to where it’s comfortable for you. You’ll hear a slight click in each position.

How do you remove the headrest on a 2018 Chevy?

Press this large button as well and then you can pull the headrest. All the way out. Before you start you’re going to want to make sure that you’ve got your seat.

How do you remove the rear headrest on an equinox?

Up. So we press I can feel it. And then we left let me see if we can lift this up. Um it’s hard using one hand again let me press and then we are. Well the thing is like you need to hold it pressing.