How do you remove the oil filter on a Chevy Equinox?

Removing the Oil Filter on a Chevy Equinox
To remove the oil filter on a Chevy Equinox, you will need to access the bottom of the engine. Here are the steps to follow:
1. Elevate the vehicle: Use a set of jack stands and a jack, or ramps, to elevate the vehicle so that you can work at the bottom of the engine.
2. Drain the oil: Before removing the oil filter, it’s important to drain the oil from the engine. Locate the oil drain plug and remove it to drain the oil into a suitable container.
3. Remove the old filter: Once the oil is drained, locate the oil filter. On most Chevrolets, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, you may need an oil filter wrench.
4. Install the new filter: Before installing the new oil filter, it’s recommended to wipe a thin film of oil on the gasket for the new filter. This helps create a good seal. Screw the new filter in place, making sure it is tightened securely but not over-tightened.
5. Refill the oil: After the new filter is installed, replace the drain plug and refill the engine with the recommended type and amount of oil. The type of oil required for your Equinox can be found in your owner’s manual or by consulting a trusted source.
Remember to follow the manufacturer’s recommendations for the mileage interval between oil changes and use the appropriate oil filter for your vehicle.
I hope this helps! Let me know if you have any other questions.

How do you change the oil on a Chevy Equinox?

And then the oil drain plug. Right there we’re gonna get our pan ready right underneath it we’re gonna take our breaker bar in the 15 millimeter socket we’re just gonna bust this thing loose.

What size socket is the oil filter on a 2015 Chevy Equinox?

32mm Socket
32mm Socket for Ecotec,TDI,VW,Audi,BMW,Polaris,GM,Volkswagen,Pontiac Chevrolet,Saturn,Pontiac,Saab,Chevy, Oil Filter Socket for Oil Change.

What is the best tool to remove an oil filter?

At Garage Gurus, we recommend using a cap type tool, a three-leg tool, a chain system or a band wrench. Once you have loosened the oil filter by following the methods described below, it should be completely unscrewed by hand.

How do you remove an internal oil filter?

For cartridge filters remove and dispose of the old cartridge. It’s also recommended to replace the o-rings on the filter when changing the cartridge to help prevent any leaks that may occur.

How do you remove an oil filter without an oil wrench?

Put it on there. And start spinning. It until your filter. Comes off.

Why wont my oil filter come off?

It could be because: The oil filter was overtightened. It’s extremely common for both DIYers and repair shops to overtighten filters, creating excessive pressure on the threads and gasket surfaces. The effects of heat and time.

How many quarts of oil does a Chevy Equinox take?

In general, an engine requires 5-8 quarts of oil. The bigger your engine, the more oil your car will need. The standard base model of the 2022 Chevy Equinox has a 4 cylinder engine, so it will take about 5 quarts of oil.

Can you remove just the oil filter?

One common question among car owners is whether they can change their oil filters without changing the oil. The good news is that you can absolutely change your oil filter without emptying the oil from your engine. This is because the location of the oil in your engine remains untouched during a filter change.

How do you remove the oil filter on a 2012 Chevy Equinox?

And a quarter socket. With kind of a wobbler attachment. And then setting that up that’s what did the trick for me. And I took that. And went right down here through the top.

How often does a Chevy Equinox need an oil change?

Every 7,500 Miles
Every 7,500 Miles
This process will keep your engine clean, lubricated, and protected from friction.