How do you remove the license plate light on a Subaru?

To remove the license plate light on a Subaru, you can follow these steps:
1. Insert a finger into the right side of the license plate light cover, then press once to the left and pull out to remove the cover.
2. Push the plastic light cover to the left, then pull down/out. The light cover is actually a unit with the bulb holder. Once it’s out, you can twist the housing, and the bulb holder will come out.
3. Push the license plate light covers inwards and then pull them out. They don’t slide, they just move a little.
4. For some models, you may need to remove the mounting screws using a Phillips screwdriver and then remove the lens.
Please note that the specific steps may vary depending on the Subaru model and year. It’s always a good idea to consult the owner’s manual for your specific vehicle for detailed instructions.
I hope this helps! Let me know if you have any other questions.

How do you change a license plate light on a Subaru?

And then out. So slide it in there. And then use a screwdriver to pry the light out. See that I’m going to do it again with my thumb. So you can see it. So slide it in and out in and out.

How do you change a LED license plate light?

Then just turned the light housing counterclockwise to release it. Then you’re able to pull out your old bulb. And install your new bulb. Then you can reinstall your lighthousing.

How do you put a license plate on a Subaru?

And they’re about the size of a pinpoint. So there’s one here. And one right there that is where you’re going to screw. Your screws in to mount your license plate. So it’s very easy to do i suggest.

How do you remove a plate light?

Put it here in this latch. And just pull it out you don’t have to unscrew. Anything this is the way to pull it out and replace the bulb. After that once you replaced. It just push it back into place.

Can I change my own tag light?

Replacing your car’s tail light bulbs is a simple and straightforward procedure. The rear light bulbs are usually housed in a single unit that’s easy to access from inside the boot. Haynes has full step-by-step information on how to do this. Most tail light bulbs are filled with halogen gas, and are readily available.

How do you remove a light cover from a light fixture?

And then go into place. And it turns clockwise to tighten it back. On. Now this one is a newer led style fixture.

How do you change a license plate light on a 2016 Subaru Crosstrek?

So I’m gonna push them to the inside. And lift up at the same time with your fingers. Okay guide them out of the tailgate. So what you’re doing.

How do you change a license plate light on a 2012 Subaru Impreza?

Here these are 168s is what this light bulb is that goes in there. So you just get a new 168. And be able to install.

How do you remove tubular lights?

One to fix it in place put the short metal prongs in the holes. And twist the bowl gently. Through 90 degrees. Now put the casing back on. Finally test the light to see if it’s working.

How to change lights on a Subaru Forester?

The pins reattach the dust cover. And reattach the plug. Voila we have light.