How do you remove a Subaru belt?

Removing a Subaru Belt
To remove a belt from a Subaru, particularly the serpentine belt, you will need to follow specific steps. Here’s a guide based on the information gathered from various sources:
1. Loosening the Alternator Bolt: The belt guard is factory welded in two pieces, and it’s important not to break that weld. To remove the belt guard that has rusted onto the alternator bracket without breaking the guard, you just need to loosen the alternator bolt and push it back a bit. This will allow the cover to slide right out.
2. Removing the Belt Cover: After loosening the alternator bolt, the cover will slide right out, allowing you to access the belt for removal and replacement.
3. Releasing the Tension: To remove the serpentine belt, you will need to prime the belt to release the tension. This can be done by following specific steps, such as removing the air intake and the belt cover.
4. Replacing the Belt: Once the old belt is removed, you can proceed with replacing it with a new one. It’s important to ensure that the new belt is installed correctly and that the tensioner lines up with the indicator after the belt is installed.
These steps should guide you through the process of removing a belt from a Subaru. If you encounter any difficulties or have specific questions about a different type of belt, feel free to ask for further assistance.

Do you need special tools to change a serpentine belt?

A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function. If your serpentine belt needs to be replaced, it can be done using only common hand tools.

What is the difference between a drive belt and a serpentine belt?

The serpentine belt is long, thin and intertwining. It curves around like a snake, hence the term “serpentine.” A drive belt is similar to the serpentine belt in that it performs those same functions. It operates the power steering pump, the water pump, the air pump, and your car’s air conditioning compressor.

What tool do I need to loosen serpentine belt?

Loosen and unthread the belt
Many have a ½” square cast into the tensioner arm, in which you insert a ½” breaker bar, or Belt Tensioner Tool to relieve the tension. Many others, you use a socket on the pulley itself to do this. Use a ratchet or breaker bar that fits into the bolt and release the tensioner.

How do you release a serpentine belt?

Now you can see our belt is totally loosened we can actually just slip it right off. Now when we’re working on the bottom side you can see your crank pulley here the air compressor.

How long does it take to replace a drive belt?

Plus, replacement is relatively easy, and if you’re wondering how long does serpentine belt service take, it’s less than an hour for most vehicles.

What happens if my serpentine belt comes off while driving?

What Happens If a Serpentine Belt Breaks While Driving? It is a serious problem, and if the belt breaks, you will find that the car becomes more difficult to drive. Additionally, if the belt breaks under high tension while in use, it can also damage other critical systems.

Can you change a drive belt by yourself?

As expected, that belt is under continuous tension and wear, so you’ll want to know what to do when it needs a replacement. Yes, replacing a drive belt is easy enough to DIY at home. A few hand tools will do, so you won’t need any professional mechanic tools.

How does a serpentine belt pop off?

The serpentine belt won’t just fall off. There is something wrong and usually that would be the tensioner. It could be weak, or stick, or sometimes they will start to bend/shift out of alignment with the other pulleys causing the belt to just walk right off.

What is the average price to replace a drive belt?

The average cost for serpentine belt replacement is between $109 and $134. Labor costs are estimated between $57 and $72, while parts range between $52 and $62.

How long does it take to remove a serpentine belt?

Some vehicles are easily done in 15 minutes. Some vehicles I cannot seem to ever run the belt correctly. Honestly, I’d expect it to take 15 minutes to an hour if your mechanically inclined. Make sure to have a copy of how the belt is to be installed on the pulleys.