How to Relearn the TPMS on an Acura
To relearn the TPMS (Tire Pressure Monitoring System) on an Acura, you can follow these steps:
1. Check Tire Pressure: First, ensure that all tires are properly inflated to the pressure indicated on the tire placard.
2. Drive the Vehicle: Drive the vehicle for at least 15 minutes at a speed of at least 30 mph. This will allow the system to learn the new sensor IDs.
3. Alternate Method with a TPMS Scan Tool: If you have a properly formatted TPMS scan tool, you can use it to scan each sensor in the following order: LF, RF, RR, LR, and the full-size spare (if equipped). Turn the ignition to the ON position and connect the scan tool to the OBDII port to upload the sensor IDs.
It’s important to note that some Acura models may have specific relearn procedures, so it’s recommended to consult the vehicle’s instruction manual or contact a professional auto or tire service center for the specific procedure for your Acura model.
Remember, if you’re unsure or uncomfortable performing the TPMS relearn procedure yourself, it’s always best to seek assistance from a professional auto or tire service center.
I hope this helps! Let me know if you have any other questions.
Contents
- What are the three types of TPMS relearn procedures?
- What is the TPMS code on an Acura?
- What is the relearn procedure for TPMS?
- How much does it cost to relearn TPMS?
- Where is the TPMS button located?
- What are the 3 most common TPMS relearn procedures?
- Where is the TPMS reset button on Acura TL?
- Can you relearn TPMS sensors without a scan tool?
- Do Acura TPMS need to be programmed?
- Can I reset my TPMS myself?
What are the three types of TPMS relearn procedures?
The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types. Indirect TPMS systems use an initialization procedure which may require a TPMS tool to figure out the steps involved to reset the system.
What is the TPMS code on an Acura?
The TPMS meaning is “Tire Pressure Monitoring System” and uses tire pressure sensors to track the air pressure of your tire. If the system detects one or more of your vehicle’s tires are under-inflated, the light will appear — some TPMS lights flash.
What is the relearn procedure for TPMS?
TPMS Vehicle relearn procedures vary by automaker. Some vehicles relearn automatically when you drive them. Others require a TPMS scan tool to complete the relearn. The process for many Asian makes and models may also require connecting a tool to the OBDII connection.
How much does it cost to relearn TPMS?
The average cost for a Tire Pressure Monitoring System Relearn is between $35 and $44. Labor costs are estimated between $35 and $44. This range does not include taxes and fees, and does not factor in your unique location.
The TPMS reset button is usually located beneath the steering wheel. If you can’t locate it, check your owner’s manual. Inflate all of your tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to do the same thing to the spare tire, as it could also have a sensor.
What are the 3 most common TPMS relearn procedures?
The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types. Indirect TPMS systems use an initialization procedure which may require a TPMS tool to figure out the steps involved to reset the system.
Check your owner’s manual if you have trouble finding the reset button. You’ll usually find it beneath the steering wheel.
Can you relearn TPMS sensors without a scan tool?
With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.
Do Acura TPMS need to be programmed?
Based on your experience, it would seem that each TPMS Sensor on the wheel transmits to the four Initiators which sends the info back to the TPMS Control Unit. No programming needed as long as the TPMS Sensors are the 433Mhz units.
Can I reset my TPMS myself?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.
