How do you relearn the TPMS on a Chevy Spark?

How to Relearn TPMS on a Chevy Spark
To relearn the Tire Pressure Monitoring System (TPMS) on a Chevy Spark, you’ll need a TPMS Relearn Tool. Here are the steps to reset the TPMS on a Chevy Spark:
1. Prepare for Reset:
– Turn the ignition key to the ON position without starting the engine.
– Press the MENU button briefly until you see the REMAINING OIL LIFE on the display.
2. Reset Process:
– Start from the driver side front tire.
– Place the TPMS Relearn Tool against the tire sidewall, near the valve stem.
– Depending on the vehicle model, you may need to adjust tire pressure to the recommended level on the tire placard.
– Turn the ignition to On but don’t run the engine.
– Press the menu button for about 5 seconds.
– Go to the Tire Pressure Learn menu.
– Press and hold the SET/CLR button until you hear the horn sound twice.
3. Completion:
– Driving for a few miles (kilometers) will complete the calibration after 2 minutes of cumulative driving at 20 mph (32 km/h).
Remember, driving with over or under-inflated tires can expose you to various road risks, including reduced braking distance and higher chances of tire bursts. It’s important to reset the TPMS to ensure safe driving conditions [[7]].
If you need further assistance or encounter any issues, it’s recommended to consult the Chevrolet Spark Owner’s Manual or reach out to a certified Chevy repair center or tire shop for support.
I hope this helps! If you have any more questions, feel free to ask.

What are the relearn procedures?

The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types. Indirect TPMS systems use an initialization procedure which may require a TPMS tool to figure out the steps involved to reset the system.

How do you relearn a tire pressure sensor?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

How do you sync tire pressure sensors on a Chevy?

You start at the left front wheel and go clockwise around the vehicle to the right front right rear. And left rear. And when you’ve completed the training on the final wheel.

How long does it take to relearn tire sensors?

With the vehicle off, turn the key to the “On” position, but do not start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh.

What are the three types of TPMS relearn procedures?

The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types. Indirect TPMS systems use an initialization procedure which may require a TPMS tool to figure out the steps involved to reset the system.

Can you relearn TPMS sensors without a scan tool?

With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.

How do you reset the TPMS on a Chevy Spark?

Before you start your vehicle, turn your key to the “On” position. Once the TPMS light is on, hold the TPMS reset button until the icon flashes three times. Start your vehicle and wait about 20 minutes to allow the sensor to reset.

Can I reset my TPMS myself?

Turn the car key to “on” but don’t start the vehicle. Press and hold the TPMS reset button until the tire pressure light blinks three times. Release the button and start the car. The light should go off within 20 minutes.

How do you reset a Chevy Spark?

We’re going to hit menu. Just a few times it actually comes up here reset 21%. I’m going to hold down the set and Clear button right here. Just go ahead and hold that down.

What does tire learn mean on Chevy Spark?

If you see “Tire Learning Active” on your gauge cluster’s display, it means your TPMS system is calibrating itself. TPMS communicates with tire pressure sensors inside your car’s wheels. If tire pressure drops in one of these wheels, the TPMS turns on a light on your dash.