How do you relearn a Subaru TPMS?

Relearning a Subaru TPMS
To relearn a Subaru TPMS (Tire Pressure Monitoring System), the process involves specific steps and tools. Here are the key points to consider:
Relearn Steps and Tools:
– The relearn process for Subaru TPMS involves using a dedicated TPMS tool or an enhanced/factory scan tool.
– The ignition should be in the OFF position, and all tires must be inflated to the proper pressure to start the relearn process.
– The dedicated TPMS tool should be held to the tire’s sidewall within three inches of the valve stem to read all sensor IDs.
– Some newer Subaru models have TPMS control modules integrated with the keyless entry control module, which may require specific procedures if the control module is replaced.
OBD Relearn:
– For Subaru Forester models, an OBD relearn is recommended to transfer new TPMS sensor IDs to the vehicle’s ECU when a sensor is replaced or when tires have been rotated.
Resetting the TPMS Light:
– In a Subaru, the TPMS light looks like a semi-circle with an exclamation point. If the light stays on, it’s important not to ignore it, and driving the car for about 20 minutes may allow the system to relearn the new pressure values.
Additional Considerations:
– It’s important to avoid the use of any liquid or tire sealant injected into tires equipped with TPMS, as this may cause malfunction, and if evidence of sealant use is noted, it’s recommended to replace the TPMS.
In summary, relearning a Subaru TPMS involves specific steps and tools, including the use of a dedicated TPMS tool or an enhanced/factory scan tool, and in some cases, an OBD relearn may be necessary for certain Subaru models.
If you have any further questions or need more detailed information, feel free to ask!

What is the life expectancy of a Subaru TPMS sensor?

TPMS Life Expectancy
The estimated life expectancy of an OE TPMS sensor is 5 to 12 years, with the average lifespan being 7 years. TPMS life expectancy is directly related to the number of radio frequency transmissions the sensors make.

What are the three most common relearn procedures?

The three types of relearn procedures are auto relearn, stationary (manual) and OBD. Some vehicles may use a combination of two or more relearn types.

Can I reset my TPMS myself?

Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait about 20 minutes for the sensor to refresh. You will find the tire pressure monitor reset button under the steering wheel. Refer to your vehicle’s owner’s manual if you can’t find it.

What is the relearn procedure for TPMS?

TPMS Vehicle relearn procedures vary by automaker. Some vehicles relearn automatically when you drive them. Others require a TPMS scan tool to complete the relearn. The process for many Asian makes and models may also require connecting a tool to the OBDII connection.

Where is the TPMS module on a Subaru?

So and then there’s the module see that stud. There there’s two of those studs Two Nuts uh you do those you can pull it up out of the. Way then the carpet lays back in nice and easy.

How do you reset TPMS if there is no button?

Check your vehicle manual. If your TPMS is indirect, your mechanic / tire shop will need to manually reset the sensors after changing your tires or switching them around. If you have a DIRECT TPMS system, then there is no additional maintenance to reset the system.

Can you relearn TPMS sensors without a scan tool?

With the exception of some models that may be relearned to the vehicle via a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure. Some aftermarket sensors require special programming to meet the vehicle’s application specifications prior to installation and relearn.

How much does it cost to relearn TPMS?

The average cost for a Tire Pressure Monitoring System Relearn is between $35 and $44. Labor costs are estimated between $35 and $44. This range does not include taxes and fees, and does not factor in your unique location.

Where is TPMS reset button?

Set the parking brake. Look for a button to the left of the steering column labeled with the TPMS icon if it’s there push and hold it until the TPMS indicator in the instrument panel blinks twice.

Where is the TPMS reset button on a Subaru crosstrek?

Unfortunately, Subaru doesn’t install a TPMS reset switch on cars sold in the U.S. If the warning light remains illuminated even after you’ve confirmed that your tires are inflated to the correct pressure, you’ll need to visit a tire shop or a dealership to have the system reset.