How do you pop the trunk on a Subaru Outback?

Opening the Trunk of a Subaru Outback
To open the trunk of a Subaru Outback from the inside, you can follow these steps:
1. Locate the Internal Handle: There is a small plastic cover at the center of the tailgate on the bottom of your trunk hatch. Removing the plastic cover will reveal the lock. You’ll see a lever on the lock which, when activated, will unlock the trunk. With the trunk unlocked, simply push to get the trunk to open.
2. Manually Open the Latch: Inside the latch, there is a small piece of white plastic that you move upward to manually open the latch.
3. Alternative Methods: On some models, you may need to push down on a small metal lever attached to the bottom of a spring, or use a glow-in-the-dark trunk-release lever, which opens the trunk from the inside in the event of an emergency.
It’s important to note that these methods may vary slightly depending on the specific model and year of the Subaru Outback. If you encounter any difficulties, it’s advisable to consult the vehicle’s manual for model-specific instructions.
I hope this helps you open the trunk of your Subaru Outback! If you have any further questions, feel free to ask.

How do I manually open my Subaru Outback trunk?

To open Your Subaru Outback trunk from inside there is a small about one inch square just inside the latch. There is a small piece of white plastic in there that You move upward to manually open the latch.

Where is the trunk release on a Subaru Outback?

The first one is there’s a button right underneath the Subaru badge. This will work if the car is unlocked or you have the key in your pocket. Just push that button that will go up. You can close it

How do you open the trunk release button?

The back part of the vehicle. But because it’s not visible at all you really can’t see it so what you need to do is check out underneath. The trunk area above the license plate bracket.

What can cause your trunk to not open?

If the trunk refuses to open using the key, then either the trunk lock cylinder or the metal rod could be the issue. An unresponsive trunk lock actuator can also be caused by a faulty trunk lock relay.

How do you reset the trunk on a Subaru Outback?

How to reset your Subaru rear hatch. When this issue is occurring, the car will beep three times each time you press the rear gate button. The natural response is to release the button once the car beeps. To reset the rear door, keep holding the rear hatch release button until you hear a soft “thuck”.

How can I get my trunk open?

Most car models have a button or lever on the dashboard or in the front seat area that opens the trunk. If you’re in the front seat, you can easily push the button or pull the lever to pop the trunk.

How do you open the hatch on a Subaru Outback?

Press the button on the underside trim above the license plate the rear gate will automatically. Open you can also press the lock button on the rear gate to simultaneously. Close the rear gate and

How do I open my trunk from the inside?

Depending on the vehicle, you may have a button or manual lever inside the cabin that can pop the trunk, possibly even inside the glovebox. Look for a pull-up lever on the floor to the left of the driver’s seat. Some vehicles also have hidden trunk-release latches behind the seats, or in the doors or armrests.

How do you open the trunk of a Subaru?

Make sure the doors are unlocked or that you have the fob with you press the rear gate opener button above the license plate. Area the rear gate will open automatically.

Why is my Subaru Outback trunk not opening?

You will want to open and close all doors and the hatch. Lock and unlock the vehicle and try it again. If it is still an issue then try a reset of the liftgate module. You can do this by disconnecting the battery (both positive and negative terminals).